RoIP GATEWAY
Installation guide
q
VE-PG2
[Connecting a PC using an Ethernet cable]
Use an Ethernet crossover cable when connecting the
VE-PG2 to a PC, because the VE-PG2 does not have the
Ethernet straight/crossover cable automatic detect function.
Also, be careful of
the cable polarity when connecting the
VE-PG2 to a HUB that does not have the Ethernet straight/
crossover cable automatic detect function. If the polarity is
wrong, the [LAN] LED will not light.
OPC-2073
Connection cable (For the transceiver)
OPC-2074
Connection cable (For the repeater)
The VE-PG2 has two operating modes, �Bridge mode �default��� and ��elective call mode.��
�Bridge mode �default��� and ��elective call mode.��
Bridge mode �default��� and ��elective call mode.��
�� and ��elective call mode.��
and ��elective call mode.��
��elective call mode.��
�elective call mode.����
• The transceiver connected to the VE-PG2 and transceiver to be called must be set to the same channel.
The VE-PG2s can be transmitted signals to the transceivers through the IP network.
In the Bridge mode has ��ulticast mode�� and �Unicast mode�� operations.
��ulticast mode�� and �Unicast mode�� operations.
�ulticast mode�� and �Unicast mode�� operations.
�� and �Unicast mode�� operations.
and �Unicast mode�� operations.
�Unicast mode�� operations.
Unicast mode�� operations.
�� operations.
operations.
• In the �ulticast mode, the VE-PG2 calls all transceivers that are connected to the VE-PG2 �default�.
• In the Unicast mode, the VE-PG2 calls a specified transceiver that is connected to the VE-PG2.
q
w
r
t
y
e
e
If the channel for transceiver
A2 and transceiver A3 is set
to CH2, transceivers in Area
A can communicate with
transceivers in Area B.
If the channel for transceiver
B1 and transceiver B2 is set
to CH18, transceivers in
Area B can communicate
with transceivers in Area A.
[Area A]
Specified Icom transceiver
Channel: CH2
Channel: CH18
Transceiver A1
Transceiver A2
Transceiver A3
[Area B]
Specified Icom transceiver
Transceiver B1
Transceiver B2
Transceiver B3
IP
network
VE-PG2
192.168.0.2
VE-PG2
192.168.0.3
[LAN]
[LAN]
OPC-2073
OPC-2073
Transmission from transceiver A1 to transceiver B3.
Transmission from transceiver B3 to transceiver A1.
Example of the Bridge mode operation
[TRX1]
[TRX1]
Channel: CH2
Transceiver A
Channel: CH18
Transceiver B
Example of the Bridge mode operation: Calling a transceiver in another area �Transceiver A1 calls Transceiver B3�.
q
�et Transceiver A1’s channel to CH2, and while holding down [PTT], speak into the microphone at your normal voice level
to call Transceiver B3.
w
When Transceiver A receives the AF signal from Transceiver A1, Transceiver A sends the AF signal to the VE-PG2 through
the OPC-2073.
e
The VE-PG2 �[Area A]� converts the AF signal to an RoIP signal, then transmits it from the [LAN] port to the VE-PG2 �[Area
B]� through the IP network.
r
The VE-PG2 �[Area B]� converts the RoIP signal to an AF signal, then Transceiver B receives the signal.
t
Transceiver B3 receives the signal from Transceiver B.
y
Transceiver B3 can also transmit a signal to communicate with Transceiver A1.
CAUTION:
Use only the specified cable to connect a transceiver or repeater to the VE-PG2. Using another cable, like an
Ethernet cable may damage the VE-PG2, transceivers or repeaters.
This installation guide describes the VE-PG2 operating
mode �Bridge mode and �elective call mode�, and the
sample connection settings.
Read �Installation guide
�Installation guide
Installation guide
w
�� for the sample connection
for the sample connection
setting details.
Download the VE-PG2 instruction manual from Icom web
site �http://www.icom.co.jp/world/�, if necessary.
Transmits to all transceivers in the network
Example of the Multicast mode operation
Transmits to the specified transceiver in the network
Example of the Unicast mode operation
IP
network
IP
network
Transmits to all transceivers in the network
Example of the Multicast mode operation
Transmits to the specified transceiver in the network
Example of the Unicast mode operation
IP
network
IP
network
This guide describes about the preparation, operation
mode, connection, setting screen and IP address setting.
Read ��
PRECAUTIONS
�� first if you have not read it.
first if you have not read it.
�tep1: Installation guide
q
�tep2: Installation guide
w
1. Preparation
Accessories
Required items
Options
3. Operation mode
The DT�F tone code can be used for calling the specified station or controlling the external equipment in the �elective call
mode.
Example of the Selective call mode opration
Then starts communicating through the VE-PG2 A and VE-PG2 B.
VE-PG2 A transmits calling signal to the VE-PG2 B when DTMF code (example: “1”) is received.
w
e
(Transceiver A)
(VE-PG2 A)
(VE-PG2 B)
(Transceiver B)
q
Transmits a DTMF code (example: “1”) to communicate with Transceiver B through the IP network.
VE-PG2 finishes communicating when no audio is sent to transceivers A and B for 15 seconds.
Or, hold down transceiver’s [PTT] and [#] for 1 second to transmit a # DTMF signal from transceivers A or B.
IP
network
2. Transceiver and repeater settings
�et the transceiver and repeater as shown in the following table before connecting to the VE-PG2.
Setting items
Transceiver
Repeater
Channel
any
any
Audio volume level
�et the volume to the 12 o’clock position any
External I/O �D-sub 25� port setting*
1
–
Ext. I/O 18 Output Low Voltage 2
Required optional connection cable*
2
OPC-2073
OPC-2074
*
1
The C�-FR5000
cloning
software
and OPC-1122U
cloning
cable
are required when you set External I/O D-sub 25 port setting.
*
2
Use the specified connection cable when connecting the transceiver or repeater to the VE-PG2.
The following transceivers and repeaters are usable with the VE-PG2.
The optional connection cable is required, refer to the following table.
Model name
Optional connection cable
IC-F121�/IC-F221�
OPC-2073 �approximately 5 m; 16.4 ft�
IC-F121/IC-F221
IC-F111�/IC-F211�
IC-F111/IC-F211
IC-FR5000/IC-FR6000
OPC-2074 �approximately 5 m; 16.4 ft�
Usable transceivers and repeaters
Bridge mode operation
Selective call mode operation
• AC adapter
To set the VE-PG2, the following hardware and software are
required:
• PC �PC connected by an Ethernet cable�
�icrosoft
®
Windows
®
XP, �icrosoft
®
Windows Vista
®
or
�icrosoft
®
Windows
®
7 is installed.
• Ethernet cable
• Connection cable
• Ground wire
�OPC-2073 or OPC-2074�
• Hub
• �pecified Icom transceiver
�100BA�E-TX or faster products� �The transceiver's instruction
manual�
