background image

 

HydroMassage Owner’s Manual, Revision 10-25-15 

JTL Enterprises, Inc  1-727-536-5566  •  www.HydroMassage.com 

Page 1 of 33 

Introduction to HydroMassage

®

 

 
Congratulations on your decision to add HydroMassage to your business.  HydroMassage has been trusted by 
doctors and industry leaders for over 20 years to provide clients with a convenient way to deliver the benefits of 
a 10-15 minute heated massage every day.  
 
JTL Enterprises Inc / HydroMassage® 
15395 Roosevelt Blvd 
Clearwater FL 33760 
727-536-5566  Fax +1-727-536-6633 

www.HydroMassage.com

  

[email protected]

 

 
 

Key Departments: 
 

Technical Support:  1-800-699-1008 x 1013 
Marketing Support:  1-800-699-1008 x 1027 
Admin / Logistics:  1-800-699-1008 x 1010 
Accounting:  1-800-699-1008 x 1016 
 

Mission  
 

Our mission is to improve the health and well being of the individual by providing the most effective dry 
hydrotherapy systems available.  Build value for our stakeholders through the strength of our customers’ 
satisfaction, a continued focus on innovation, our dedication to operational excellence and the personal and 
professional growth of our employees. 
 

Manufacturing 
 

All JTL products are manufactured in the United States, meeting UL / CE / CSA safety standards as well as 
being registered as a Class I medical device with the FDA.   Each component must first pass a rigorous 5,000 
hour life expectancy test before being used in production.  During production, each product must pass a 268 
inspection checklist, receive approval from four different employees and managers, and undergo a 24 hour 
testing process before being considered ready for shipment.  All products come with a two year warranty on all 
moving components and a three year warranty on major structural elements. 

 
HydroMassage Master Code # 120700 
 
Trademarks 

HydroMassage

®

 is a registered trademark of JTL Enterprises, Inc. 

 

Notice of Copyright 

HydroMassage

®

 Owner’s Manual © October 2010 JTL Enterprises, Inc. All rights reserved. 

 

Disclaimer 

While every precaution has been taken to ensure the accuracy of the contents of this manual, JTL Enterprises, 
Inc. assumes no responsibility for errors or omissions.  Please note that the information contained herein, 
including but not limited to models, specifications, options, accessories, supplies, and prices, is subject to 
change without notice. 
 
Please visit 

http://www.hydromassage.com/Customer-Support.htm

 for additional marketing, technical support, 

and installation resources. 

Summary of Contents for Lounge 440 Series


































Reviews: