Hunter 44668 Manual Download

Page: 1 / 8

Gather all tools necessary to complete your installation

before removing the old thermostat.

To install your thermostat you should have the

following tools:
Slotted Screwdriver

Phillips Screw Driver

Electric Drill and 3/16” drill bit

Hammer

Four 1.5v (AA) size alkaline batteries

Unpack your new Hunter

thermostat and ensure all

components are present in the Accessory Pack. This

includes:

2 - #8 slotted screws

2 - wall anchors for mounting

1 - sheet of terminal labels

1 - jumper wire

1 - thermostat with mounting plate.

Before you Begin

44668 ThermosTaT

This guide will make installation and programming

your new thermostat simple and fast. In just a few

minutes, you can have the Comfort Saver with Room

Control installed, programmed and ready to go. Videos

showing each step of installation and programming

are available at

www.hunterfan.com/comfortsaver

. Of

course, if you have additional questions, please call

our help line at 1-888-830-1326 from 7:00 am to 7:00

pm Monday – Friday or 8:00 am to 5:00 pm (Central)

on Saturday. You may also contact us online at www.

hunterfan.com.

43078-01 • 12/18/08

Summary of Contents for 44668









Search results

Summary of Contents for 44668

Reviews:

Related manuals for 44668

Brands by name

Popular brands

Hunter 44668, Manual

Search results

Summary of Contents for 44668

Reviews:

Related manuals for 44668

Brands by name

Popular brands