TLC-FCR-T Introduction
TLC-FCR-T
Intelligent Fan Coil controller
Features
•
Low power energy consumption – 1W per unit
•
Relays switching for outputs each up to 300W
•
Temperature control for 2-pipe fan coil systems.
•
Large temperature range from –40°C to 70°C (-40°F to
158°F).
•
Automatic fan control for three stage fans.
•
Cost saving option with Standby functionality and set point
limitations
•
External sensor or open contact for remote control,
external heat – cool change or auto-changeover on supply
temperature with selectable activation limits
•
Control for single stage heating, cooling and fan only
operation modes
•
Password protected programmable user and control
parameters
o
Setpoint range limitation
o
Access control for setpoints, fan speeds and mode
change
o
Access control for heat/cool change and time
programs
o
Select your display contents
o
Selectable behavior after return from power failure
•
Temperature display in Celsius or Fahrenheit
Deluxe Version:
•
Clock and time schedule functions
•
Blue backlight for LCD
•
Infrared remote controller option:
With special features for Boost and delayed switching on or
off
Applications
•
Air Only Systems: Three stage fans for single duct systems with up to one binary output for auxiliary heating
and cooling devices.
•
Air/Water Systems: Induction units, fan coil units for 2-pipe systems with one binary output for a spring
return valve.
General Description
The TLC-FCR-T is a stand-alone electronic fan coil controller with one control loop. The TLC-FCR-T features 1 internal
NTC temperature sensor, one open/contact or external NTC temperature input and four binary outputs (Relays).
A detailed parameterization is possible with the use of a simple configuration routine. The TLC-FCR-T can be
configured using the standard operation terminal. No special tools or software is required.
Ordering
Item Name Description/Option
TLC-BCR Compact
Binary
controller (2 Relays)
TLC-BCR-T
Compact Binary controller (2 Relays) with external input (thermistor or open contact)
TLC-FCR
Compact Fan Coil controller (4 Relays)
TLC-FCR-T
Compact Fan Coil controller (4 Relays) with external input (thermistor or open contact)
TLC-FCR-2
Compact Fan Coil controller (5 Relays) 3 Relays for fan speed, 2 for actuator control
-US Use US-Type housing that fits on a 2x4” mounting box standard
-D
Deluxe: Add clock, time schedules and infrared remote control option.
Selection of actuators and sensors
Temperature Sensors: Use only our approved NTC sensors to achieve maximum accuracy. Recommended is SDB-
Tn10-15 as Duct sensor, SRA-Tn10 as Room sensor and SDB-Tn10-15+AMI-10 as immersion sensor.
Binary auxiliary devices: E.g. pumps, fans, on/off valves, humidifiers, etc. Do not directly connect devices that exceed
2(1.2)A. Observe startup current on inductive loads! Do not connect more than one fan coil unit to one controller.
TLC-FCR-T, V2.0 22.03.2007 HRW Limited Subject to alteration Without Notice
Page 1
