INSTALLATION INSTRUCTIONS
®U.S. Registered Trademark
Copyright © 1997 Honeywell Inc. • All Rights Reserved
TG509F,G Versaguard™ Universal
Thermostat Guards
APPLICATION
The TG509F,G Versaguard™ Universal Thermostat
Guards cover and protect pneumatic wall thermostats
against tampering, damage and unauthorized adjustment
of thermostat settings. These mini-sized guards provide
coverage for smaller-sized pneumatic thermostats while
still allowing easy access for thermostat calibration. By
using an allen wrench (included), the thermostat cover can
be removed while the ring base remains in place. The
miniguards do not have wallplates, but can be used for
new and existing applications. See Table 1 for applications.
The guards are ideal for high-traffic areas such as offices,
lobbies, supermarkets, restaurants, clinics, and hospitals.
The TG509 includes a smoke-colored transparent or taupe
opaque polycarbonate cover and ring base, four anchors
and screws, and tumbler lock with two keys. Provision for
Honeywell logo (included) or OEM logo on guard cover.
Table 1. TG509 Thermostat Guard Applications.
Robert Shaw
Honeywell
Johnson
Powers Original Uniline
TP970
T4002
TH192
T12
2211
TP971
T4100
TH193
T13
2212
TP972
T4506
TH194
T18
2214
TP973
T4756
TT184
T19
2216
TP974
T5002
T23
2218
T7660
T27
TP9600
Series
T32
T33
T34
T35
INSTALLATION
When Installing this Product…
1. Read these instructions carefully. Failure to follow
them could damage the product.
2. Check the dimensions given in the instructions and
on the product to make sure the product is suitable
for your application.
Mounting
The Versaguard™ Universal Thermostat Guard can be
installed without removing the thermostat from the wall.
Mount Thermostat Guard
A
Place the ring base over the thermostat and/or
adaptor plate on the wall. Align the ring base with
the thermostat and level approximately.
B
Mark the four mounting holes.
NOTE:
Do not use the four brass colored screws
for mounting. The brass colored screws
are intended only for models with
wallplates.
C
Mount the ring base on the wall using the four no. 6
sheet metal screws and the four anchors provided.
See Fig. 1.
Fig. 1. Mount ring base.
D
Mount the guard cover by placing the hinged edge
of the guard cover on the ring base and swinging it
down (vertical mounting) or to the side (horizontal
mounting) until the guard cover is in place against
the ring base. See Fig. 2.
E
Lock the thermostat guard by turning the key
counterclockwise. See Fig. 3. The key can be
removed only in the locked position.
THERMOSTAT
M15008
WALL
RING BASE
MOUNTING
HOLES (4)
MOUNTING SCREWS (4)
6 0
6 0
7 0
8 0
9 0
6 0
7 0
8 0
9 0
69-1008-1
