![background image](http://html.mh-extra.com/html/honeywell/tp979a-e/tp979a-e_installation-instructions-manual_2158799001.webp)
TP979A-E Dual
Zero Energy Band
Pneumatic
Thermostats
Installation Instructions
Before Installation
General Equipment Required
1. Figure 1 shows dimensions for TP979A-E Dual Zero
Energy Band Pneumatic Thermostats (“Thermostats”).
Installation requires the following:
1
Honeywell
Fig. 1. TP979A-E Approximate Dimensions in Inches
(MiIIimeters).
2. Thermostats mount to a deep wall box or on a surface.
3. Table 1 describes Thermostat action and the component
thermostats that
make
up the various TP979 models.
Table 1. TP979A-E Thermostats.
TP979E2006
lDirect
with setup
14004068001 Field Mounting Kit (mounting plate,
manifold, and three-port airhead)
CCT735A (MQT735A) Thermostat Tool
CCT348 Pocket Level
AK3052 Tube (5132 in. O.D., 0.030 in. wall)
or
AK3171 Bundled Tubing (5132 in. O-D., 0.030 in. wall)
For surface mounting:
14004193-001 Wall Mounting Ring, 3-3/4 x 4 x l/2
in. (96 x 102 x 13 mm)
Fasteners appropriate to surface (e.g., molly anchors
for drywall mounting)
For flush mounting:
14001355-001 Deep Wall Box (screws provided),
2-5/8 x l-7/16 x 2-9/16 in. (67 x 37 x 65 mm), with
optional 14001354-001 Deep Wall Box Mounting
Bracket for offsetting Deep WaII Box from stud
or
Standard utility conduit box, 4 x 2-1/8 x l-7/8 in.
(102 x 54 x 48 mm)
Calibration may require the following:
CCT902 (MQT902) Test Thermometer
305965 Gage (0 to 30 psi [0 to 207 kPa])
CCT729 (MQP729) Gage Port Needle
Copyright 1990
Honeywell Inc.
l
All Rights Reserved
95-6023
MLF TAB:
II. C.
2.
a.