QUICK START GUIDE
HITRON HT-EM2
MoCA 2.0 to Ethernet Extender
Connect to the network
Connect your devices
Access the Internet
Read me
first!
Note: Connected to an existing MoCA network.
The Hitron HT-EM2 allows you to connect Multimedia over Coax
Alliance (MoCA) devices on your building’s coaxial cable network.
This guide assumes that you also have a MoCA-equipped router or
network adapter that provides Internet access to your coaxial
cable network. For more information, see
www.mocalliance.org
1
STEP
Check the box contents
Look in the box and make sure you have the followings:
HITRON HT-EM2
QUICK START GUIDE
POWER ADAPTOR
ETHERNET CABLE
2
STEP
Connect to the power outlet
Connect the supplied 12V/0.5A power adapter to your HT-EM2’s
POWER port, and plug it into a power socket.
3
STEP
Connect to the cable outlet
Connect your building’s coaxial cable to the HT-EM2’s
Coax I/O port.
The
POWER LED turns on Green when the HT-EM2 receives power.
The
MoCA LED turns on Blue when the HT-EM2 has discovered another
MoCA device on the network.
The
MoCA LED blinks when the HT-EM2 is actively sending or receiving
data over MoCA.
