![background image](http://html1.mh-extra.com/html/hifonics/tps-mr1/tps-mr1_operators-manual_2130051001.webp)
Operators Guide
TPS-MR1
Bluetooth Device Pairing
The pairing process can vary based on your particular device. Refer to the
operating instructions of your device. Below is the general process to connect.
Under the Bluetooth mode, the status indicator will flash slowly “BT music”and search
for the last paired device. If no device is located, it will flash quickly indicating it is ready
to pair to a new device.
On your Bluetooth enabled device, search for “HIFONICS” under Bluetooth settings.
Select HIFONICS, wait for the device to indicate “CONN OK.”
Music will now play through the system.
To connect to a different device while currently paired, press and hold the
PLAY/PAUSE button. This will initialize pairing mode.
FWD / Forward – This multi-function button works with your music sources. In radio
mode, quickly press to go forward to the next strongest station.
For other sources, press quickly to go to the beginning of the next song. Press and hold
for fast forward within the current selection.
1 - Play / Pause – This multi-function button works in several modes. For the BT, USB,
Apple Device mode this is play and pause.
In FM and AM mode quickly press to select station pre-set #1.
In radio mode press and hold to store the current station to this pre-set.
2 - INT / Intro – This multi-function button works in several modes. For the USB, press
this to play the introduction (first 10 seconds) of each track. Press again to turn off the
feature. (not compatible in iPod mode)
In FM and AM mode quickly press to select station pre-set #2.
In radio mode press and hold to store the current station to this pre-set.
3 - RPT / Repeat – This multi-function button works in several modes. For the USB,
press this button to repeat the current song. Press again to turn off the feature. (not
compatible in iPod mode)
In FM and AM mode quickly press to select station pre-set #3.
In radio mode press and hold to store the current station to this pre-set.
4 - RDM / Random – This multi-function button works in several modes. For the USB,
press this button allow random songs to play from that unit. The RDM will not select
random tracks from different devices, only from the unit selected.
(not compatible in iPod mode)
In FM and AM mode quickly press to select station pre-set #4.
In radio mode press and hold to store the current station to this pre-set.
8
9
10
11
12
Controls