Henderson EVOLVE POCKET DOOR PRO Series, Инструкция по монтажу

Страница: 1 / 19

1
*** For full short code replace with required finished wall thickness size – 120 or 125 (mm)
Note: If installing a liner kit with this kit please refer to Pocket Door Pro Liner Kit fitting instructions – this should be installed last.
KIT AND DOOR SPECIFICATION
Kit Short Code Max. Door Height Max. Door Width Door Thickness Range Max. Door Weight
EVOPRO1/*** 1981mm (78”) 610mm (24”) 28 – 44mm 80kg
EVOPRO2/*** 1981mm (78”) 686mm (27”) 28 – 44mm 80kg
EVOPRO3/*** 1981mm (78”) 762mm (30”) 28 – 44mm 80kg
EVOPRO4/*** 1981mm (78”) 838mm (33”) 28 – 44mm 80kg
EVOPRO6/*** 2040mm (80”) 826mm (32.5”) 28 – 44mm 80kg
EVOPRO7/*** 2040mm (80”) 726mm (28.5”) 28 – 44mm 80kg
EVOPRO10/*** 2315mm (91”) 930mm (36.5”) 28 – 44mm 80kg
2 x Socket Surround
ELECTRICAL COMPONENTS
1 x Motor Connector
Block
1 x Motor Spacer
Plate
1 x Motor
2 x M6x25 Socket
Head Screw
1 x Wall Control
Socket
1 x Wall Socket &
1 x Cover Plate
1 x 24V Transformer
About this document
This document addresses qualified personnel only. The mounting must be done by technically educated, trained and qualified
personnel. Electrical wirings have to be completed by suitably qualified specialists.
These instructions describe how to install the track and sliding door hardware. For installation of the drive motor, switches or
sensors - please refer to the operating instructions for the Evolve Motor and Wiring Instructions.
The manufacturer’s specification must be respected in especially maximum weight restriction of door leaf. Any other use of
this product is considered inappropriate use.
It is not guaranteed that this product will work in conjunction with fittings, motors or other electronic devices supplied by other
manufacturers.
The appliance is only to be used with the power supply unit provided.
Before you commence work, please read through these instructions. Please store these instructions in a safe place and pass
them on to any future owners. Damage resulting from non-compliance with these instructions and safety instructions will void
the warranty. PC Henderson nor the motor unit manufacturer will assume liability for any consequential damage.
ABOUT THIS DOCUMENT
EVOLVE POCKET
DOOR PRO
Fitting Instructions
1 x Fused
Connector