UNPACKING
After unpacking the unit, inspect carefully
for any damage that may have occurred
during transit. Check for loose, missing, or
damaged parts. If any damage is observed, a
shipping damage claim must be filed with the
carrier. DO NOT use the OEMTOOLS
™
24814
Plasma Cutter if broken, bent, cracked or
damaged parts (including labels) are noted.
Any Plasma Cutter that appears damaged in
any way, operates abnormally or is missing
parts should be removed from service
immediately. If you suspect that the Plasma
Cutter was subjected to shock load (a load
that was dropped suddenly, unexpectedly,
etc.), immediately discontinue use until it
has been checked by a factory authorized
service center.
Please read and save these instructions. Read through this owner’s manual carefully before using product. Protect yourself and
others by observing all safety information, warnings, and cautions. Failure to comply with instructions could result in personal
injury and/or damage to product or property. Please retain instructions for future reference.
The following safety information is provided as a guideline to help you operate your Plasma Cutter under the safest possible
conditions. Any tool or piece of equipment can be potentially dangerous to use when safety or safe handling instructions are
not known or not followed. The following safety instructions are to provide the user with the information necessary for safe
use and operation. Please read and retain these instructions for the continued safe use of your Plasma Cutter. Failure to follow
instructions listed below may result in serious injury. In addition, make sure that anyone who uses the equipment understands
and follows these safety instructions as well.
Operating Instructions and Parts Manual
24814
FOR CUSTOMER SERVICE
Technical Question?
CALL 1-866-458-2472
Thank you very much for choosing an OEMTOOLS
™
Product!
For future reference, please register your new tool at www.oem-tools.com and complete the owner’s record below:
Model: _______________ Purchase Date: ___________
Save the receipt, warranty and these instructions. It is important that you read the entire manual to become familiar with this product
before you begin using it. This product is designed for certain applications only. OEMTOOLS
™
cannot be responsible for issues
arising from modification. We strongly recommend this product is not modified and/or used for any application other than that for
which it was designed. If you have any questions relative to a particular application, DO NOT use the product until you have first
contacted customer service to determine if it can or should be performed on the product.
Explanation of Safety Signal Words
WARNING
:
Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION
:
Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.
CAUTION
:
Used without the safety alert symbol indicates a potentially hazardous situation which, if not avoided, may result
in property damage.
NOTES
:
Provide clarity and helpful information.
PLASMA CUTTER
110/220V 40 AMP
1
2/18
2018 OEMTOOLS
™
WARNING
