![background image](http://html.mh-extra.com/html/haws/1025/1025_installation-operation-and-maintenance-instructions-manual_2110173001.webp)
1025
Wall Mounted Drinking Fountain
Integrated Trap
Spacious fountain design allows for the trap to be internally
mounted which allows for easy access, and aids and reduces
the installation process.
Bubbler head
Patented (Pat.# 7,025,282) EnviroGard™ polished
chrome-plated brass bubbler head provides sanitary service in
the worst of conditions. The stainless steel shroud covers the
orifice surface until the water is activated, and covers it again
after use.
Drain Clean-Out
Top-down access to the drain allows the fountain to be cleaned
without taking the unit apart, which is ideal for outdoor settings
that are high in drain-clogging sediment like leaves, garbage,
and other debris.
Construction
Heavy-duty 11 gauge galvanized steel with a green powder-coat
finish incorporates a recessed push-button and welded bubbler
guard to provide extra durability, and a vandal-resistant bottom
plate for added peace of mind. Stainless steel basin with a
high-polished finish compliments almost any setting, and it also
resists stains and corrosion.
Quality Control
Fountain is pre-built and fully water and pressure tested to
ensure no leaks and proper function for reduced installation time
and added peace of mind.
Push Button
With its patented (Pat.# 6,981,692) push-button valve assembly
which allows for front access stream adjustment as well as
cartridge and strainer access, this fountain offers the ultimate in
ease of maintenance.
FEATURES & BENEFITS
o
Filter: Model 6426, 12" x 2", in-line lead removal element that
reduces lead from incoming water supply.
o
Mounting: Model 6700 universal mounting plate for most wall
mounted fountains.
o
Support Carrier: Model 6800 universal in-wall mounting support
for use with most fountains.
o
Chiller: Model HCR8, chiller provides for instantaneous cooling
to meet a continuous demand for chilled water.
To see all options for this model, visit www.hawsco.com.
OPTIONS
Model 1025 wall mounted barrier-free drinking fountain shall
include a stainless steel basin contained in an 11 gauge green
powder-coated galvanized steel wall bracket, push-button operated
valve with front-accessible cartridge and flow adjustment, polished
chrome-plated brass vandal-resistant sheiled bubbler head with
protective bubbler guard, polished chrome-plated brass
vandal-resistant waste strainer with top-down access,
vandal-resistant bottom plate, and chrome-plated 1-1/2" IPS trap.
SPECIFICATIONS
Perfect for either public or private outdoor settings, Model 1025 is a
great fit in areas where aesthetics are important to the overall
appeal of the architecture. Suitable in areas where weather
conditions exist, this series is precisely mounted to make it a nice
addition. Powder-coated finish help to maintain the fountains
overall appeal so it always remains looking as new as it did when it
was installed. Specifically, this type of wall mounted drinking
fountain may be placed in settings such as: parks, schools, and
other outdoor environments where the temperature remains above
freezing.
Model meets all current Federal Regulations for the disabled
including those in the Americans with Disabilities Act. Haws
manufactures drinking fountains, electric water coolers and electric
drinking fountains to be lead-free by all known definitions including
ANSI/NSF Standard 61, Section 9, California Proposition 65, and
the Federal Safe Drinking Water Act.
APPLICATIONS
1455 Kleppe Lane | Sparks, NV 89431 | [p] 775.359.4712 | [f] 775.359.7424 | [e] [email protected] | www.hawsco.com | 3 March, 2009
DISCLAIMER: Continued product improvements make specifications subject to change without notice. Check www.hawsco.com for the latest product information and updates.