background image

Troubleshooting

USE AND CARE GUIDE

COMFORT BREEZE

TM

 REMOTE CONTROL

Questions, problems, missing parts? Before returning to the store, call Customer Service

8 a.m. - 6 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST Saturday

1-855-HD HAMPTON

HAMPTONBAY.COM

We appreciate the trust and confidence you have placed in Hampton Bay through the purchase of this remote 

control. We strive to continually create quality products designed to enhance your home. Visit us online to see our 

full line of products available for your home improvement needs.

Thank you for choosing Hampton Bay!

1. 

Read and save these instructions.

2. 

All wiring must be in accordance with the National 

Electrical Code ANSI/NFPA 70-1999 and local electrical 

codes. Electrical installation should be performed by a 

qualified licensed electrician.

3. 

The supply to the remote control receiver should be 

connected through a mains switch, i.e. existing wall 

switch.

4. 

Disconnect from the power supply at the wall switch 

before working on the remote control receiver or ceiling 

fan.

5. 

Install the receiver into the ceiling fan canopy of the fan to 

ensure proper protection.

WARNING:

 To reduce the risk of fire or injury, 

do not use this product in conjunction with any 

variable (rheostat) wall control.

Safety Information

Warranty

CAUTION:

 Incorrect wire connections will damage 

this receiver.

The supplier warrants the remote control and receiver to be free from defects in workmanship and 
material present at time of shipment from the factory for a period of one year after the date of purchase 
by the original purchaser. We agree to correct such defects without charge or at our option replace with 
a comparable or superior model if the product is returned. To obtain warranty service, you must present 
a copy of the receipt as proof of purchase. All costs of removing and reinstalling the product are your 
responsibility. Damage to any part such as by accident or misuse or improper installation or by affixing 
any accessories, is not covered by this warranty. Servicing performed by unauthorized persons shall 
render the warranty invalid. There is no other express warranty. Home Depot hereby disclaims any and 
all warranties, including but not limited to those of merchantability and fitness for a particular purpose to 
the extent permitted by law. The duration of any implied warranty which cannot be disclaimed is limited 
to the time period as specified in the express warranty. Some states do not allow a limitation on how 
long an implied warranty lasts, so the above limitation may not apply to you. The retailer shall not be 
liable for incidental, consequential, or special damages arising out of or in connection with product use 
or performance except as may otherwise be accorded by law. Some states do not allow the exclusion 
of incidental or consequential damages, so the above exclusion or limitation may not apply to you. This 
warranty gives specific legal rights, and you may also have other rights which vary from state to state. 
This warranty supersedes all prior warranties. Shipping costs for any return of product as part of a claim 
on the warranty must be paid by the customer.
Contact the Customer Service Team at 1-855-HD HAMPTON or visit www.HAMPTONBAY.COM

Pre-Installation

TOOLS REQUIRED

Phillips 

screw-

driver

Flathead 
screw-
driver

Adjustable 
wrench

Electrical 
tape

Wire 
cutter

Step ladder

Part

Description

Quantity

A

Transmitter

1

B

Receiver

1

C

Plastic wire connector

5

D

AAA battery (1.5 V)

2

E

Silicone rubber plug

1

PACKAGE CONTENTS

IMPORTANT:

 This product and/or 

components are governed by one or more 

of the following U.S. Patents: 5,947,436; 

5,988,580; 6,010,110; 6,046,416, 6,210,117 

and other patents pending.

A

B

C

D

E

Installation

1

2

NOTE:

 The frequencies on your receiver 

and hand unit have been preset at the 

factory. Before installing the receiver, 

make sure the dip switches on the 

receiver and hand unit are set to the 

same frequency. The dip switches on the 

hand unit are located inside the battery 

compartment.

NOTE:

 The battery will weaken with age 

and should be replaced before leaking 

takes place as this will damage the hand 

unit. Dispose of the used battery properly 

and keep the battery out of the reach of 

children.

Setting the codes on the 
remote control and receiver

Installing the receiver

WARNING:

 To reduce the risk of fire or 

electric shock, remember to disconnect 

power. The electrical wiring must meet 

all local and national electrical code 

requirements. The electrical source and fan 

must be 110/120 volt, 60Hz. Do not use this 

product in conjunction with any variable 

wall control. Incorrect wire connection can 

damage this receiver.

CAUTION:

 If other fan wires are a different 

color, have this unit installed by a licensed 

electrician.

CAUTION:

 Do not install in a damp location 

or immerse in water (For indoor use only). 

Do not pull on or cut leads shorter. Do not 

drop or bump the unit.

B

A

Antenna

Installation (continued)

Problem

Solution

The fan will 

not start.

 

Check the main and branch circuit fuses or breakers.

 

Check to make sure the wall switch is in the on position if applicable.

 

Check the line wire connections to the fan and switch wire connections in the switch 

housing.

 

Check the battery in the transmitter.

 

Ensure you are in the normal range of 10-20 ft (3-6m).

 

Ensure the dip switch settings are the same on the transmitter and receiver. 

 

Remember to turn off the power supply before checking the dip switches settings.

Operation

          Item #1001 309 463
       Model #68131             

6. 

This unit is to be used for the control of the ceiling fan 

and in a AC110/120V 60Hz power supply only.

7. 

Acceptable for installation in damp locations. Do not 

immerse in water.

8. 

The remote must be stored in a dry location when 

not in use.

9. 

Electrical diagrams are for reference only. 

10. 

Do not pull on or cut leads shorter.

11. 

Do not drop or bump the unit.

12. 

After making the electrical connections, secure each 

with electrical tape; spliced conductors should be 

turned upward and pushed carefully up into the 

outlet box. The wires should be spread apart with the 

grounded conductor and the equipment-grounding 

conductor on one side of the outlet box.

13. 

Do not mix old and new batteries. 

14. 

Do not mix alkaline, standard (carbon-zinc), or 

rechargeable (ni-cad, ni-mh, etc) batteries.

NOTE:

 The ceiling fan must be set at HIGH 

speed and light kit (if installed) should be 

set to the ON position.

NOTE:

 The battery will weaken with age and 

should be replaced before leaking takes 

place as this will damage the transmitter. 

Dispose of used battery properly. Keep the 

remote out of the reach of children.

NOTE:

 It is imperative that the code used 

for both transmitter and receiver is exactly 

the same, otherwise remote controller will 

not work.

AAA

BBB

B

Receiver (B) correctly
positioned in the
mounting bracket.

B

Setting the Code on the Remote

 

Remove the battery cover on the back of the 

remote control (A) by pressing firmly on the 

arrow and sliding the cover off.

 

Slide the code switches to your choice of 

either up or down.  The factory setting is up.

 

For fans with incandescent bulbs, slide the 

dip switch O/D to the position marked “D”, if 

you are not using incandescent bulbs slide 

the dip switch to the “O” position.

 

Install 2  AAA batteries (included).

 

Replace the battery cover on the remote 

control (A).

Setting the Code on the Receiver

 

Slide the code switches on the receiver (B) 

to the same positions as set on the remote 

control (A).

 

Insert the silicone rubber plug (E) into the 

hole in the receiver (B) to cover the dip 

switches.

Controller Model: TR221A

 

Position the house supply wires (AAA) 
to one side of the slide-on mounting 
bracket (A); position the fan wires (BBB) 
to the opposite side. 

 

Insert the narrow end of the receiver 
(as shown, flat side towards the ceiling) 
into the slide-on mounting bracket 
until it rests on top of the ball/downrod 
assembly.

Installation (continued)

3

Wiring the receiver to the household wiring

IMPORTANT:

 Use the wire connecting nuts (AA) supplied with 

your fan. Secure the connectors with electrical tape and 

ensure there are no loose strands or connections.

WARNING:

 Each wire not supplied with this fan is designed to 

accept up to one 12-gauge house wire and two wires from the 

fan. If you have larger than 12-gauge house wiring or more 

than one house wire to connect to the fan wiring, consult an 

electrician for the proper size wire nuts to use.

 

Spread the wires apart so that the green and white wires are on one 

side of the outlet box and the black wire is on the other side. 

 

Connect the green fan wires to the household ground wire (this may 

be a green or bare wire) using a wire connecting nut (AA).

 

Connect the receiver black (or red) wire to the household black (hot) 

wire using a wire connecting nut (AA).

 

Connect the receiver white wire to the household white wire (neutral) 

wire using a wire connecting nut (AA).

 

Secure each wire connecting nut using electrical tape. 

Black

(or Red)

Black

Green

(or Bare)

Green

Outlet Box

in the ceiling

(MM)

Antenna

White

B

C (x3)

WARNING:

 To avoid possible electrical shock, turn the 

electricity off at the main fuse box before wiring. If you 

feel you do not have enough electrical wiring knowledge or 

experience, contact a licensed electrician.

Wiring the fan to the receiver

 

Connect the fan motor white wire to the receiver white wire 

using a wire connecting nut (AA).

 

Connect the fan motor black wire to the receiver black wire 

using a wire connecting nut (AA).

 

Connect the fan motor blue wire to the receiver blue wire 

using a wire connecting nut (AA).

 

Secure each wire connecting nut using electrical tape. 

 

Turn the wire connecting nut (AA) upward and push the wiring 

into the outlet box (MM).

4

IMPORTANT:

 Use the wire connecting nuts (AA) 

supplied with your fan. Secure the connectors 

with electrical tape and ensure there are no loose 

strands or connections.

Outlet box
in the ceiling
(MM)

B

Blue

Antenna

Black White

Green

C (x3)

 

 - Press and release the

   

button to turn the fan and the lights on or off.

 

Press and hold the

   

button for 3 seconds to use the “walk away 

time delay”; this will activate the light for 30 seconds (if you are using 

dimmable bulbs the light will be activated at 50% brightness).

 - Press and release 1 time - turns the fan on high speed.

 - Press and release 2 times - turns the fan on medium speed.

 - Press and release 3 times - turns the fan on low speed.

 - Press and release 4 times - turns the fan off.

 - Press and hold this button for 3 seconds to enable Comfort Breeze

TM

; this 

will change your fan speed randomly, simulating a relaxing breeze. To cancel 

this feature press 

 or  .

 - While the fan is on press 1 time - turns on a 2 hour run timer.

 - While the fan is on press 2 times - turns on a 4 hour run timer.

 - While the fan is on press 3 times - turns on an 8 hour run timer.

 - Press and release the 

 button to turn the light on or off. 

If you are using dimmable bulbs and you have previously set O/D dip switch 

in your remote to the “D” position, press and hold the 

 button to activate 

the dimmer function.

1

Operating the remote control

This equipment has been tested and found to comply with the limits for a Class B digital device, 
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection 
against harmful interference in a residential installation. This equipment generates, uses and can 
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may 
cause harmful interference to radio communications. However, there is no guarantee that interference 
will not occur in a particular installation. If this equipment does cause harmful interference to radio 
or television reception, which can be determined by turning the equipment off and on, the user is 
encouraged to try to correct the interference by one or more of the following measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and receiver.
--Connect the equipment into an outlet on a circuit different from that to which the receiver is 
connected.
--Consult the dealer or an experienced radio/TV technician for help.
CAUTION:
Any changes or modifications not expressly approved by the grantee of this device could void the 
user’s authority to operate the equipment.
FCC ID: KUJCE10319
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two 
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any 
interference received, including interference that may cause undesired operation.      

Summary of Contents for COMFORT BREEZE 68131
















Reviews: