![background image](http://html1.mh-extra.com/html/hammond-manufacturing/contempra-2-series/contempra-2-series_assembly-instructions_3457324001.webp)
PAGE 1 OF
REV.
TOOL BOX
BUL10283
A
1
CONTEMPRA 2 - SERIES
ASSEMBLY INSTRUCTIONS FOR
CCE - CABLE ENTRY DOOR ADAPTER
HAMMOND
MANUFACTURING
TM
ELECTRONICS GROUP
visit our website @
www.hammondmfg.com
ITEM No.
DESCRIPTION
QTY
1
CCE----BK1
1
2
SCREW 8-32 X 1/2 LG
6
3
NUT 8-32 KEPS
6
PARTS LIST
ASSEMBLY INSTRUCTIONS:
A) Ensure all parts are available. See BOM list.
B) Remove the 4 knock out holes located at the bottom of frame
opening (use proper striking tool). Detail A shows location of knock
out holes
C) Line up CCE at the base of the cabinet so the holes line up with
the K.O. holes. Install screws supplied from the inside of the CCE
and fasten using nut supplied (Detail B).
D) If additional support is desired, then drill one 1/4" hole on each
side using CCE as a template and fasten additional hardware
supplied
Placement of CCE
A
DETAIL A
B
DETAIL B
1
Holes to knock out
Flat Head
Screw Driver
Hammer
Striking
Tool