background image

100

  

370

380

  

100

200

  

19.5

1

2

ES50V-G1(H)

ES70V-G1(H)

ES100V-G1(H)

0040502335

V

Electrical Diagram

Exterior and accessories

Technical parameters

Meanings

of Icons

  

·

·

Capacity

     (L)

  Net 

weight

  (kg)

a1

(mm)

b1

(mm)

c1

(mm)

d1

(mm)

e1

(mm)

f1

(mm)

ES50V-G1(H)

Model No.

ES70V-G1(H)

ES100V-G1(H)

A : Hot water outlet    B : Cold water inlet     C : Inner chamber      

D : Temperature measurement pipe    E : Heating pipe    F : Magnesium rod    G : Wall hook 

Note

1.The margin of error for the above parameters (measurements, weight) is ±10%.

         2.The thermometer is not a precision instrument. It consists of three areas denoted by blue; 

            orange and red, which indicate the temperature of water in the inner chamber from low to 

            high respectively.

A

B

F

E

BT

MT

L

N

EH

E

HL

Haier Home Water Heater

Instruction manual

Please read this Instruction Manual carefully before use.

0040503115

V*****

Please retain this manual for future reference.

Troubleshooting

Safety Notices(Please read before use)

Electrical Diagram·Exterior and accessories·

Technical parameters

Symptom

   

Things to Check

Solutions

1

Whether the water supply

      has stopped or whether 

      the water pressure is too 

      low

2

Whether the water-usage

      point is blocked or 

      whether the hot water 

      valve is openeded

1

Whether hot water outlet 

      is opened

Check

Check and clear

Check and open

Check power socket

2

Whether the water

      temperature is adjusted

Increase the temperature to the required 

value. Once the water is heated to the 

pre-set temperature, control flow volume 

of cold and hot water using the moderating 

mixing valve.

3

Heating time is too short 

      and set temperature is 

      not achieved

Adjust water temperature

4

Whetehr heating pipe is

      damaged

Confirm it is not due to the reasons under

,

 and 

, then contact Maintenance

Department

Confirm that this is not due to reason 

then contact Maintenance Departmentnt

Confirm that this is not due to reason 

then contact Maintenance Departmentnt

1

Whether power is 

      properly connected

Continue heating

1

Water has not reached

      the set temperature

Calibrate using the method stipulated in the 

Instruction Manual

1

Whether the present 

      temperature setting is 

      too low

Set lower mixing valve

2

Whether water pressure 

      is too much

2

Whether thermostat is 

      out of control

Set lower mixing valve or ensure water 

pressure is stable before use

Whether water pressure is 

stable

2

Whether thermostat is

      out of control

Only cold 

water but the 

heating 

indicator 

lamp is lit

Only cold 

water and 

the heating 

indicator 

lamp is not lit
Heating 

indicator 

light Is on all

the time

Water volume

is sometimes

large or small, 

or water is 

sometimes 

hot or cold

Samll hot 

water outflow 

volume

These are actions 

which are forbidden  

Forbidden

 

Forbidden

 

Forbidden

 

Forbidden

 

Forbidden

 

Forbidden

 

Forbidden

 

Forbidden

 

Immediately cut off power supply and 

contact our Service Center once the 

water heater does not work properly or 

emits burnt smell.

Storing of inflammable and explosive items 

near the water heater is strictly prohibited.

L:Live wire (brown) 

N:Neutral line (blue)

MT:Manual-reset thermostat

BT:Adjustable thermostat 

HL:Heating indicator light 

EH:Heating tube

E:Earth line (yellow-green; dual color)

Front view

Rear view

Side view

Cross-section view

Do not connect to power when installing or 

repairing the water heater.

Installation of water heater outdoors is strictly 

prohibited.

Take care not to be scalded by heated water. 

Do not use water from the water heater for drinking 

or similar purposes.

Touching of hot water valve and pipes is strictly 

prohibited.
Make sure to check the water temperature before 

use; use only when it feels suitable.

Please take precautionary measures during cold 

weather, in order to prevent damage to water 

heater from freezing.

Do not install the water heater in an environment 

which is susceptible to ice-formation. Ice will 

cause the container and water pipe to break, 

leading to scalding and water leakage.

Non-professionals are strictly prohibited from 

carrying out repairs,  maintenance, dismantling 

or revamping of the water heater.

220V/50Hz independent power source 

must be used at all times.

Do not use damaged wire and power 

socket. Promptly clean the dust on the 

power plug and socket.

To ensure safety, the water heater should 

be connected to independent sockets (do 

not use adapters), with reliable earthing. 

In addition, the power socket must conform 

to national standards. Use of water heater 

without reliable earthing is strictly prohibited. 

Use pen multimeter to check whether the 

live line and zero line are reverse.

monitors the status of your earth line, to 

ensure safety during showering.If the 

icon is lit, it means that there is electricity 

in the earth line. You should immediately 

stop using the water heater and disconnect 

the power plug. Do not touch the outer 

casing of any electrical appliances in your 

home. Remember to also contact the local 

After-sales department or property 

management company in order for them to 

engage qualified electricians to carry out a 

system check until the icon is no longer lit.

This icon is used by Haier 

Water Heaters to indicate "

safety warning experts". It 

indicates that the product is 

equipped with special t

echnology that constantly 

Warning

Warning

Warning

If the soft power cable is damaged, it must be 

replaced by professional staff from the 

manufacturers or Maintenance Department in 

order to avoid danger.

Warning

Warning

Check the power meter and the electric 

wire's diameter to ensure that they comply 

with the rated current for the water heater. 

Where necessary engage qualified 

electrician to check the electric circuit.

Do not touch the plug with wet hands, and 

make sure that the water heater, plug 

socket do not come into contact with water. 

If they are accidentally wet, they must be 

checked by professions appointed by our 

company before using, in order to prevent 

electrocution.

Warning

Earthing

These are actions 

which must be 

carried out  

CAUTION

CAUTION

Please cut off the power supply if the water heater 

was not used for an extended period of time. Drain 

the water heater of all water according to the 

instructions in the chapter on Cleaning and 

Maintenance.

CAUTION

These are matters for

which attention is 

required 

50              19.5              410             420              730             100              200             320

70              23.5              410             420              935             100              200             480

100              30                410             420             1230            100              200             730

 230V~,50Hz        2150W            0.80MPa                  IPX4             Not less than 0.05MPa

Voltage

Rated power Rated pressure Waterproof rating

Water pressure

Reviews: