![background image](http://html1.mh-extra.com/html/gorenje/iqook/iqook_quick-reference-manual_2245477001.webp)
DRYING STEPS
en (10-14)
Please consult the extended manual for
detailed instructions.
QUICK REFERENCE GUIDE
Use of the IQcook system
EN
The minute minder
will remain active after
the hob is switched off.
Touch the timer
function key.
Display "CL" will
turn to "0".
Touch the slider
to set the value
between 1 and 9
minutes.
Confirm the setting
by touching the
timer key.
The display will turn
to "X" (X ... selected
value). Now set the
value "1x to 9x". The
value will be stored
and the countdown
will start.
Confirm the setting
by touching the
timer key.
If no cooking zone
is selected, the
cooking hob will
be switched off
automatically after
a few seconds and
the minute minder
display will be
saved.
The countdown
timer is connected to
the active cooking zone.
When the cooking time
expires, the cooking
zone will be switched
off.
Touch the cooking
zone selector key.
Use the slider to set
the cooking power
level.
Touch the slider
to set the value
between 1 and 9
minutes.
Confirm the setting
by touching the
timer key.
Touch the timer
function key.
Display "CL" will
turn to "0" and the
symbol (clock) will
flash, indicating
the active cooking
zone.
The display will
turn to "X" (X ...
selected value).
Now set the
value "1x to 9x".
The value will be
stored and the
countdown will
start.
MINUTE
COUNTDOWN
CONTROL
LIGHTS DURING
OPERATION
The water/oil is
not boiling/has not
heated up yet.
The water/oil is
boiling/has heated
up. Place the food
into the pot.
The symbol will
flash and if you
remove the lid,
there will be a beep.
Replace the lid!
Press anywhere on
the slider.
Remove the lid
(only with cooking
with a large amount
of water – method
2). Put the food into
the pot or pan and
press any field on
the slider.
SmartSense
- This control
system makes
sure the food in
the pot or pan
does not boil
over if there is
a shortage of
liquid.
(for functions that
require the use of the
lid)
SLOW COOKING
1
Select the
symbol. The
symbol will be lit up.
Symbol
, after five seconds, it will
go out.
2
When the water heats up,
the symbol will light up.
This function is suitable for
dishes that take longer to cook –
with slow heating by maintaining
the temperature.
3
Select the
symbol which
will start to flash.
When milk heats up, the symbol
will light up.
Method 1
Method 2
OPERATING MODES
SETTING THE CLOCK
5 sek.
(depending on model)
PROBLEM
Possible causes
Solution
Boil Sense function is activated.
Remove the pan from the cooking zone. (out of liquid)
Boil Sense function is activated.
Pan bottom is wet. Wipe the pan and restart the cooking
process.
(flashing)
The lid was removed.
Place the lid back onto the pot or pan.
(flashing)
Battery low, or interrupted communication with the
cooking hob.
Press the key on the IQ sensor or restart the program.
Replace the battery.
F1
Dirty or damaged bottom side of the IQ sensor.
Clean the bottom side of the IQ sensor.
If the bottom side is damaged, do not use the sensor.
F2
Error in communication between the IQ sensor and the
hob.
Replace the battery on the IQ sensor.
F3
IQ sensor battery low.
Replace the battery.
F4
Cooking zone is too hot.
Wait until the cooking zone cools down.
TROUBLESHOOTING