background image

ISSUED: 04-21-03  SHEET #: 055-9158-1

1 of 8

Visit the Peerless Web Site at www.peerlessindustries.com

For customer service call 1-800-729-0307 or 708-865-8870.

 Read instruction sheet before you start installation and assembly.

Maximum Load Capacity: 20 lb (9.1 kg)

Installer must verify that the ceiling will safely support
the combined weight of projector mount and projector.

WARNING

IMPORTANT! Be sure not to touch the projector while tightening the set screw on the
ball and socket mount. This may cause the image to be unaligned when you let go.

Installation and Assembly - Security Projector Mount
for Gateway

™ 

210 Projector

R

Three Different Applications:

Flush Mount .....................................................................................................................................  step 3, page 5

Threaded Rod .................................................................................................................................. step 4, page 5

Extension Column ........................................................................................................................................ page 6

Installation Conditions:

To Wood Joist Finished Ceilings,
Exposed Wood Joists, or Wood Beam Ceilings ........................................................................................ page 3

To Concrete Ceilings .................................................................................................................................... page 4

IMPORTANT!  Turn to the appropriate page for your application and ceiling condition.

This product is intended for use with UL
Listed products and must be installed
by a qualified professional installer.

Model: PJ-G210
Reference Gateway 8007000

Summary of Contents for 210









Reviews: