background image

03587 04/17

Important: Retain these instructions for future use.

Gasmate® is a registered trademark of:   

Sitro Group Australia Pty Ltd  www.gasmate.com.au 

 

 

 

 

 

Aber Ltd - Hamilton, N.Z.  www.gasmate.co.nz

FOR YOUR SAFETY

If you smell gas:

1.  Shut off the gas to the appliance.
2.  Extinguish any open flame.
3.  If odour continues, immediately call 

your gas supplier.

Do not store or use gasoline or other flammable 

vapour and liquids in the vicinity of this or any 

other appliance.

FOR OUTDOOR USE ONLY 

WARNING: 

Improper installation, adjustment, alteration, 

service or maintenance can cause injury or 

property damage.
Read the instructions thoroughly before installing 

or servicing this equipment.

Model No. BQ2050W, BQ2053W

  Traditional style smoker for delicious smoking 

and slow cooking of foods

  Glass viewing window
  10.5MJ/h burner
  Durable steel construction
  3 Adjustable chrome plated wire racks
  6 Hanging meat hooks
  Vitreous enamel smoker box
  3 Heavy duty door and drawer handles
  Door mounted thermometer with chrome bezel
  2 Side handles that double as tool hooks
  Includes water bowl and smoker box to add 

moisture and flavour when cooking

  Hose and regulator included
  For outdoor use only
  Universal LPG
  Gas certified to Australian Standards

Summary of Contents for BQ2050W





















Reviews: