Quick Start
How to Power On/Off your Headset
Charging Your Headset
FJ890 Bluetooth headset uses a rechargeable battery that must be charged fully before you use
the headset for the first time.
1.Put the Bluetooth headset in the charging case and covers it.
2.Plug the AC adaptor into the electrical source and put the DC head into the charging case to charge.
4.The bluetooth headset will be fully charged in approximately 2 hours.
5.Remove AC charging adaptor from the headset.
Notification:The bluetooth headset must be charged another 1.5hours after the LED light is off.
To learn more Full-Join Bluetooth Headset information, do not hesitate to visit our website:www.full-join.com
To Power Your Headset On/Off
Operation step
:
Press and hold the multi functional Button for 5-6 seconds until you hear a long sound(Do~), meantime
you can see alternative red & blue light, then release..
100
%
100
%
Pairing Your Headset and Mobile phone
With the headset and mobile phone putting near each other:
1 With headset off, hold multifunctional Button for 5-6 seconds until the LED red＆green light flashes alternately.
2
.
Perform a discovery
device
from the mobile phone. For details on device discovery for your mobile phone,please refer to the mobile phone user's guide.
When the scan is complete, the mobile phone displays "devices found".
3
.
Select the FJ890 from the discovered device list and perform according to the clues on the mobile phone.
4
.
During the confirmation of the mobile phone, enter the password "0000" and confirm that the headset has been paired successfully with the headset.
The device ID has now been stored in the mobile phone's memory. Pairing is successful when the
headset indicator flashes several times rapidly.
.
100
%
Operation steps
:
Operation
steps
:
Fj890
Bluetooth
Multi-functional Button
Volume Control Button -
Volume Control
Indicator Light
