background image

 1

318200435 (0511) Rev. C

Electric

Electric

Electric

Electric

Electric

Range

CONTENTS

Page

Product Registration ....................................................... 2
Important Safety Instructions ..................................... 3-4
Installation Instructions .............................................. 5-6
Oven Light ...................................................................... 6
Surface Light .................................................................. 7
Circuit Protection ............................................................ 7
Indicator Light ................................................................ 7
Models with Touch Pad Control ...................................... 7
Specialty Pans & Trivets .................................................. 8
Canning Tips & Information ........................................... 8
Selecting Surface Cooking Utensils ................................ 9
Surface Cooking

Setting Surface Controls (some models) ...................... 9
Ceramic Glass Cooktop (some models) ................ 10-15

Types of heating units used .................................. 10
Models with Electronic Surface
Element Controls (ESEC) ................................. 11-14
Setting Warm Zone Controls ................................. 15

Oven Baking .................................................................. 16
Air Circulation ................................................................ 16
Convection Cooking (some models) ............................. 17
Convection Roasting (some models) ............................ 17
Speed Bake Cooking System (some models) ................ 18
Broiling .......................................................................... 19
Oven Settings ................................................................ 19
General Cleaning

Cleaning Various Parts of Your Range ........................ 20
Ceramic Glass Cooktop (some models) ................ 21-22
Care and Cleaning of Stainless Steel (some models) .. 22
Cleaning the appliance ......................................... 23-26

To Remove and Replace the Oven Door ........................ 26
Removable Outer Door Glass Panel (some models) ..... 27
To Remove and Replace Storage Drawer ...................... 27
Warmer Drawer (some models) ............................... 28-29
Avoid Service Checklist ........................................... 30-33
Warranty ........................................................................ 34

Summary of Contents for CMEF212ES



































Reviews: