The Fountainhead Group
Compressed Air Sprayer
1-800-311-9903
Owner’s Manual
Models OML-1, RML-1, GGS-1, SML-1, SML-2
WARNING!
The sprayer is operated with liquid under pressure. Failure to observe CAUTION and to follow instructions for operating and cl
eaning
can cause tank, hose and other parts to be weakened and/or rupture under pressure. This can result in SERIOUS INJURY from high
pressure discharge of liquids
or forcible ejection of parts. DO NOT USE FLAMMABLE MATERIALS IN THIS SPRAYER. Material could ignite or explode, causing seri
ous injury. FOR SAFE USE
OF THIS PRODUCT - YOU MUST READ AND FOLLOW ALL INSTRUCTIONS BEFORE USE.
TEST SPRA YER WITH W
ATER BEFORE USING ANY
CHEMICALS.
ASSEMBLY INSTRUCTIONS
1.
2.
BARB
CONNECTION
SHUT-OFF
PUMP HANDLE
SHUT-OFF
LOCK
EXTENSION
BARB
CONNECTION
TANK
NOZZLE
HOSE ASSEMBLY TO TANK:
IMPORTANT: Two
identical
hose nuts
are included in the parts kit. Both
hose nuts are
required
for
proper assembly
of the sprayer.
Do not
attempt
to
heat,
or
alter
hose, hose nut, or barb
prior to assembly.
Slide hose nut over end of hose (observe proper hose nut
orientation in above diagram). Push hose completely onto tank
barb, as shown in step #1 of above diagram.
Slide hose nut along hose and over barb threads. Turn hose nut
clockwise to completely tighten over hose, as shown in step #2 of
above diagram (do not use tools).
HOSE ASSEMBLY TO SHUT-OFF:
Repeat steps #1 and #2 above, while connecting hose to barb of shut-off.
IMPORTANT:
1.
2.
It is recommended to
test sprayer using
plain
tap water
before
spraying chemicals.
Test all connections
for possible leaks. Use
proper eye protection while testing.
If sprayer does not pass the
water test, call our customer service center before using sprayer
with chemicals.
Make sure hose is not cracked or frayed and does not show signs of
swelling. Make sure the hose is securely connected to sprayer.
OPERATING INSTRUCTIONS ARE CONTINUED ON NEXT PAGE
E-mail: [email protected] • Web site: www.TheFountainheadGroup.com
SAFETY PRECAUTIONS:
1. Read owner’s manual completely before
operating this sprayer.
2. This sprayer is designed for light duty lawn and
garden use only.
3. Always use goggles, gloves and protective
clothing when using sprayer.
4. Read and follow all instructions and cautions on
label of products used in this sprayer.
5. Spray when air is calm to prevent drift of
chemical.
6. Do not leave sprayer in the sun when not in
use.
7. Never use flammable liquids, caustics, acids
or hot water in this tank.
8. Never store chemicals in this tank.
9. Always release pressure when sprayer is not in
use and before removing pump from tank.
10. Never stand with face or body over sprayer when
pressurizing tank or releasing pressure.
11. Clean and rinse sprayer thoroughly after each use.
12. Never attempt to alter sprayer from original
condition.
13. Always use replacement parts from original
manufacturer.
1-800-311-9903
If you have any problems with, or have any questions about your sprayer,
BEFORE YOU
RETURN IT TO THE STORE, CALL OUR TOLL FREE CUSTOMER SERVICE CENTER AT:
HOSE ASSEMBLY INSTRUCTIONS
IMPORTANT
11111
22222
IMPORTANT
11111
1. PUSH HOSE COMPLETELY ON.
2. TIGHTEN NUT COMPLETELY.
!
!
NEVER USE SPRAYER WITHOUT NUT.
