background image

7’ x 7’ Summer House

Fixing Pack (ASUM77FP)

Not to Scale

ASUM77FP

REQUIRED TOOLS : 
(NOT SUPPLIED)

POZI DRIVE SCREWDRIVER

SPIRIT LEVEL

TAPE MEASURE

HAMMER

MUST PRE DRILL

Parts:

B

ASUM77V2VE

R2

Black 32mm screw Qty 5

Tower Bolt Qty 2

(supplied with 6 x 20mm screws)

Handle Qty 2

(supplied with 20mm screws)

Press Lock set 

Qty 1

Important : 

Assembly of this 
building requires 

a minimum of two 

adults.

207012208

ROOF SHEET 

ASUM75PE

PLAIN END QTY 1

ASUM75PS

PLAIN SIDE QTY 2

ASUM75DE

DOOR PANEL QTY 

22121710PARDTR (1710mm) STRIP 

ASUM77V2HR

HAND RAIL QTY 2 

FELT78BL

FELT QTY 1

FIN20010512DTR

FINIAL  QTY 2

ASUMDRLHDTR

LEFT HAND DOOR 

40120500PARDTR (500mm) STRIP QTY 

35282070PAR (2070mm) BATTEN QTY 2

80121200PARDTR (1200mm) BOARD 

35281732PARA1DTR (1732mm) ANGLED POST 

40120650PARDTR (650mm) STRIP QTY 

40120800PARDTR (800mm) STRIP QTY 

C

D

G

O

 J

F

A

P

S

U

M

 V

W

IMPORTANT, RETAIN FOR FUTURE REFERENCE; READ 
CAREFULLY

Check all parts prior to assembly

- Most buildings are pre-treated with a factory base coat for 
protection during storage and transit. We recommend that you 
treat your new building as soon as possible after assembly using 
a wood preservative treatment. Apply in accordance with the 
manufacturers instructions.
- Timber is a natural material. It will shrink and swell as a result 
of varying moisture content.
- Please keep all plastic bags and small parts away from children
- This product must be built on a solid level base.
Technical Help line: 

0333 7777 089

 

 8.30 am and 5.00 pm  

Monday to Friday.

In line with your statutory rights, please check all parts prior to 
assembly, as assembly of damaged parts may be deemed to be 
acceptance and this may affect the remedies you are entitled to. 
If the product is not constructed in accordance with the 
instructions, or is altered in anyway (e.g. painted), the 
manufacturer cannot be held liable for any resulting damage

SHARP KNIFE 

FOR ROOFING FELT

 T

3.5 x 30mm Screws Qty 92 

4.0 x 30mm Zinc 

Screws Qty 2 

4.0 x 40mm Screws Qty 8 

4.0 x 60mm Screws Qty 4 

Turn Button

Qty 2

Hinge 

Qty 4

Felt 

T

acks Qty 120

Forest Garden Ltd. Unit 288 Hartlebury Trading Estate, Hartlebury, Worcestershire, DY10 4JB

ISSUE 0414

ADD75FL

FLOOR QTY 1

ASUMDRRHDTR

RIGHT HAND 

DOOR 

45281508PARDTR (1508mm) BATTEN 

40121785PARDTR (1785mm) STRIP 

45450300PARA2 (ANGLED BLOCK )QTY 

35280150PAR (150mm)

 BATTEN QTY 4

N

 L

S

 K

H

E

4.0 x 50mm Screws Qty 58 

Corner Brace

 Qty 4

4.0 x 30mm Screws Qty 24 

PW860319

WINDOW QTY 2

 I

35280848PARGDTR (848mm) BATTEN 

Q

Summary of Contents for CRNRSUM77

Page 1: ...d preservative treatment Apply in accordance with the manufacturers instructions Timber is a natural material It will shrink and swell as a result of varying moisture content Please keep all plastic bags and small parts away from children This product must be built on a solid level base Technical Help line 0333 7777 089 8 30 am and 5 00 pm Monday to Friday In line with your statutory rights please...

Page 2: ...ews for each join Make sure that all four sides are square and fix them to the floor using 50mm screws Use 4x50mm screws for the door end A and Plain end B Use 3x50mm screws for the sides C Place each of the 1710mm strips Q against the corners of the building Fix each in place using 4 x 3 5 x 30mm screws Position the veranda E against the front of the building the cladded only From inside the buil...

Page 3: ...s L so this is flush with the roof sheet but is 380mm apart from the batten Fix using 2 x 3 5 x 30mm screws Repeat this for the other roof to make a left and right hand roof section From outside of your building fix a turn button to the top and bottom of the left hand door using 2 x 4 0 x 30mm zinc screws Make sure that the turn button will reach across both doors when in its closed position Place...

Page 4: ... roof is flush at the back Use 4 x 40mm screws to secure the roof to the side panels and 6 x 3 5 x 30mm screws to secure the roof section to the front and back panels Fix the roof section to the top of the 1508mm batten N with a single 50mm screw Place two pieces of the felt on the lower sections of the roof Make sure these are positioned centrally and have an overhang of approximately 50mm Secure...

Reviews: