background image

Please, assemble the TrimLine at home the first time, not at an event.

TRIMLINE CANOPY  10' x 15'

Before beginning assembly of your TrimLine, 
please take time to review the enclosed Parts 
List to familiarize yourself with the TrimLine 
and to confirm that all parts are present.

Also, review these instructions along with the instructions for any accessories or options you have 
purchased, such as Awning or Rear Door assemblies. Parts for TrimLine accessories often need to be 
installed during set up of the canopy. Reviewing all instructions before beginning set up will help 
ensure that you have the necessary accessory parts in place as you set up your TrimLine.

***The TrimLine Canopy can be set up by one person, but as with any canopy    
                                  set up is easiest with a little help!

Visit our website to see all options available for the TrimLine Canopy: 

flourishdisplays.com

10 foot Front

15 foot Front

Video instructions are available on our website!

Go to: 

flourishdisplays.com/instructions 

or scan this code with your QR 

Code Reader App for a direct link to our instructions and videos.

Assembly Instructions

Summary of Contents for TRIMLINE CANOPY 10' x 15'











Reviews: