![background image](http://html1.mh-extra.com/html/fitcheck-technology/fc6110/fc6110_quick-start-manual_2301283001.webp)
1
7
4
2
8
5
3
6
Charging your FitCheck
®
FC6110
Attach optional LED extender
Turn on FitCheck
®
device
Attach FitCheck
®
device
Attach optional filter button
Don mask and perform fit check
Using the
FitCheck
®
mobile app
A green light illuminates on the LED indicator
for a passed test
LED indicator - Pass
A red light blinks on the LED indicator for
a failed check. Wait until the LED indicator flashes
purple signalling for a retest of the fit check.
LED indicator - Failed
Continues overleaf >
Quick start guide
Ensure your FitCheck
®
is fully charged before use.
Charging can be done via the USB-C port on the
side of the device.
*Always use USB-C cable supplied
USB-C
charging cable
Attach the optional LED extender into the
USB-C port if the light on the device is not
visible for indication.
Press and hold power button until green light
flashes then release.
Press and hold power button to turn device off.
Position FitCheck
®
over the face of the filter and
turn clockwise until device locks into position.
Position closure button on the face of the filters
and twist clockwise to lock into position.
Press and hold the optional filter button to seal
device (or cover filter with hand), draw a breath until
the flashing purple LED turns solid, at which point
hold your breath static for up to 10 seconds and
wait for the result.
>