Troubleshooting
The following is a list of problems you may encounter when using this appliance and some suggestions that may help to
correct the problem. If you still have problems, contact your Fisher & Paykel trained and supported service technician.
Problem
Possible Causes
What to do
Pressing
‘Power’
does not turn on
the dryer
Fault with household
power supply.
Try plugging in and turning on another electrical appliance.
Dryer does not
heat
Dryer set to ‘Cool Air’
cycle.
Check what cycle the dryer is set to (
refer ‘Drying cycles’
).
Change to preferred cycle.
Full water tank.
Refer to ‘Emptying the water collection tank’.
The dryer has progressed
to ‘Cool’.
Check the progress — are ‘Cool’ or ‘End’ shown on the display?
Refer to ‘Progress lights’.
Touching
does not start
the drying cycle
Dryer door not closed
properly.
Open and reclose the door. Check that the lint filter is correctly in
place and not obstructing the door.
Is the dryer displaying a
user prompt or fault code?
Refer to ‘User warnings’ and ‘Fault codes’.
Water tank full or not
properly in place.
Refer to ‘Emptying the water collection tank’
. Ensure the water
tank is properly in place.
Lint filter needs to be
emptied.
Empty the lint filter and ensure it is correctly in place.
Dryer is overloaded.
Remove some items from the dryer.
‘Delay Start’ function is set.
Refer to ‘Delay Start’
for more information.
Updated: Wed, 10 Nov 2021 13:46:44 GMT
Powered by
1
