background image

Pressing the 

TEST BUTTON

 

when the full alarm is sounding will 

SILENCE THE ALARM FOR 10 
MINS.

 For safety reasons it cannot 

be selected in advance.

Smoke & Heat Alarms Guide

ALWAYS

 read the 

ENTIRE

 

handbook and keep it in a 

safe place! 

ALWAYS

 make 

sure you understand the 

lights and sounds.

Fireblitz Extinguisher Ltd 

Units 15/17 Manford Industrial Estate, Manor Road, Erith, Kent DA8 2AJ.

Tel: 01322 342238   

|

   Fax: 01322 331532   

|

   Email: [email protected]   

|

   www.fireblitz.co.uk

Fireblitz reserve the right to change the design or specification details without prior notice.

REF: COL&S 01/2021

Important

information

FH150/155/160

Compact design

&

TSE-Technology

FHB10

FEATURING

X-Profile

&

TSE-Technology

FHB10W

FEATURING

X-Profile

&

TSE-Technology

FHH10

FEATURING

Advanced

THERMISTOR 

Protection

FHH10W

FEATURING

Advanced

THERMISTOR 

Protection

FireHawk Smoke and Heat Alarms have a 

LOW BATTERY 

SILENCE

 Feature. Pressing  the 

TEST BUTTON

 when the Low 

Battery Warning system is activated will  

SILENCE THE WARNING FOR  
10 HOURS.

 Have a good nights  

sleep and change the alarm the  
following day. For safety reasons it  
cannot be selected in advance.

USER MANUAL

ALARM SILENCE

LOW BATTERY SILENCE

SOUNDER

HEAT 

SENSOR

RED LED

TEST

BUTTON

Summary of Contents for FH150






Reviews: