User manual
Max 860 Lumens
Fenix RC15 is a top pick for rechargeable flashlight performance.
With 860-lumen max output, RC15 offers useful working levels
down to 9 lumens. Exceptional runtime combines with long throw
and solid recharging times to make RC15 an everyday duty light
ready to answer the call.
Fenix RC15 Flashlight
Technical Parameters
860 Lumens
130
Lumens
350
Lumens
General Mode
Low
Mid
High
Turbo
284
(
Max
)
m
20200
(
Max
)
cd
IPX-8 underwater 2m
,
1m
AC charger, car charger, charging cradle, holster, lanyard and spare O-ring
1h 10min
3h
9 Lumens
100h
ANSI/NEMA FL 1
RC15
FENIXLIGHT LIMITED
Tel:+86-755-29631163/83/93 Fax:+86-755-29631181
www.fenixlight.com
E-mail:[email protected]
Address: 8/F,2nd Building,DongFangMing
Industrial Center,33rd District,Bao'an,
Shenzhen 518133,China
Product Warranty
6h 30min
Usage and Maintenance
Strobe
Mode
860 Lumens
Operation Instruction
There are two push-button switches on the side of the light‘s head.
The big one with a power source mark is the power switch, and the
small one with a loop mark is the mode switch.
Turning RC15 on/off
A single press on the power switch will turn the light on/off.
Selecting Output
With the flashlight on, a single press on the mode switch will select
the brightness level in the order of Turbo→ Low→ Mid→ High
brightness levels.
◎
Uses Cree XM-L (U2) LED with a lifespan of 50000 hours
◎
Tailored 2600mAh 3.7V rechargeable Li-ion battery
◎
168mm(Length)
x
25.4mm (Battery Tube Diameter)
x
42mm(Head
Diameter)
◎
245-gram weight (including the battery)
◎
Digitally regulated output maintains constant brightness
◎
Anti-roll, slip-resistant body design
◎
Dual switch on the head for fast and convenient operation
◎
Made of durable aircraft-grade aluminum
◎
Premium Type III hard-anodized anti-abrasive finish
◎
Toughened ultra-clear glass lens with anti-reflective coating
◎
The charging equipment supports AC charger and car charger
Strobe Mode
When the flashlight is on, press and hold the mode switch for one
second to enter into Strobe mode. It will flash between 6Hz and
15Hz every two seconds. A single press on the mode switch will
return the flashlight to the general mode.
With the flashlight off, press and hold the mode switch for one
second will enter into strobe mode momentarily till the mode switch
is released.
Lock the Flashlight to Prevent Accidental Operation
Turn on the flashlight and hold the power switch for two seconds,
the flashlight will blink twice and turn off to signal that the flashlight is
locked. To unlock the flashlight, just double click the power switch.
Intelligent Memory Circuit
The flashlight memorizes the last brightness level used in the
general mode, but it will not remember any flashing modes (some
models may not have flashing modes). The next time you turn on
the flashlight, it will light up at the last used general mode.
:
RC15 will accumulate a lot of heat when it is working in Turbo
output. When overheating is detected, the flashlight will
automatically drop down into the high brightness level. You can
reset the flashlight to Turbo output again when the temperature
drops.
Low-voltage Warning Function
When the voltage level drops below the preset level, the flashlight
will downshift to a lower brightness level. When it happens in low
Intelligent Thermal Management
Output mode, the flashlight will blink three times every five
minutes to remind you to recharge the flashlight.
Over-discharge Protection
When the battery voltage is extremely low, the flashlight will turn
off automatically to protect the battery from over-discharge.
Charging
When the charging cradle is plugged into a household outlet, the
indicator light will turn green. Put the flashlight into the charging
cradle and rotate it until it clicks into position. The indicator light
will now turn red to indicate charging has begun. When the
indicator light returns to green, the charging cycle has been
completed. The normal charging time is about 3 hours.
NOTE:
1
.
Please do not charge the flashlight when it is turned on. Doing
so will extend the charging time and may cause the battery to be
not fully charged. However If emergency lighting is needed, it will
still be okay to charge the flashlight when it is turned on. Due to
the output protection function, RC15 can not enter into the Turbo
in this case.
2
.
Please recharge a stored RC15 every four months to maintain
optimum performance of the battery.
◎
Please don't disassemble the sealed head, as doing so can
cause damage to the flashlight and will void the warranty.
◎
The O-ring may be worn out after using for a long time. If it
happens, please replace the O-ring with a new one to keep
the flashlight properly sealed against water.
◎
Periodic cleaning of the battery contacts improves the
flashlight's performance as dirty contacts may cause the
flashlight to flicker, shine intermittently or even fail to
illuminate for the following reasons:
Reason A: The battery lacks power.
Solution: Recharge the flashlight.
Reason B: The threads, PCB board contact or other contacts are
dirty.
Solution: Clean the contact points with a cotton swab soaked in
rubbing alcohol.
If the above methods do not work, please refer to the warranty
policy before contacting your authorized distributor.
Notice: The routine cleaning video can be watched and
downloaded through the Fenix website by clicking on the RC series
followed by the maintenance tab.
We will replace products afflicted with manufacturing defects
within 15 days of purchase and repair a light free of charge
within 24 months of purchase if problems develop with normal
use; if repair is required after 24 months from the date of
purchase, we will charge for parts. The total repair fee is dictated
by the cost of the replaced materials.
Rechargeable batteries and chargers have a one year warranty
with proof of purchase.
Warning
RC15 is a high-intensity lighting device capable of causing eye
damage. Avoid shining the light directly into anyone’s eyes.
Product Registration
We kindly suggest that you register your product on the official
website of Fenixlight Limited
( www.fenixlight.com ). You’ll receive
an extra six months of warranty coverage once you have
successfully registered. By participating in an optional customer
survey, you are entered in a drawing for free Fenix products.
Available Accessories
Diffuser tip
AOD-M
Belt clip
AB02
Bike mount
AF02
Flashlight Ring
ALG-01
Model
Type
Description
Note
Note: For full details about available accessories, please visit
the Fenix website, click on Products followed by clicking through
to the Accessories page.
Notice: The above-mentioned parameters are approximate and may vary due to different environments.
Mode Switch
Head
Power Switch
Tailcap
