background image

 

1

 

EyeGrabber Canon G Series Instruction Manual 20110615

 

Fantasea EyeGrabber Canon G Series 

 

(Cat. No. 4054)

 

Instruction Manual

 

 

The 

EyeGrabber Canon G Series

 allows for secure storage of Fantasea accessory lenses and filters when not installed 

on the housing. 
 

Compatible with the Following Lens Accessories: 

 

BigEye Lens G Series 

(Cat. No. 5135)

 

 

 

BigEye Lens S90/S95 

(Cat. No. 5139) 

 

EyeDaptor G Series-F67 

(Cat. No. 4701)

 - with any lens accessory mounted on top of the adaptor 

 

EyeDaptor S90/S95-F67 

(Cat. No. 4710)

 - with any lens accessory mounted on top of the adaptor 

 

RedEye Filter G Series 

(Cat. No. 5201)

 

 

PinkEye Filter G Series 

(Cat. No. 5303)

 

 

RedEye Filter S90/S95 

(Cat. No. 5305) 

 

PinkEye Filter S90/S95 

(Cat. No. 5307)

 

 

SharpEye Lens M67 

(Cat. No. 5128)

 - only when mounted on top of the EyeDaptor G Series-F67 

(Cat. No. 

4701) 

or the EyeDaptor S90/S95-F67 

(Cat. No. 4710)

   

 

Using the EyeDaptor G9-G10 

(Cat. No. 4703)

 or the EyeDaptor S90/S95-G Series 

(Cat. No. 4707)

 with any of 

the lens accessories mentioned above, still allows mounting these lens accessories on the 

EyeGrabber

 

 

Any of the lens accessories mentioned above can still be mounted on the 

EyeGrabber

 when color correction 

inserts are installed inside 

 

Please note that this 

EyeGrabber

 is not compatible with the RedEye Filter G7/G9 

(Cat. No. 5203)

 

 

Included in the Kit: 

 
 
 
 
 
 
 
 
 
 

Instructions for Use: 
 

1. Assembling the EyeGrabber Lens Holder on a Flex or Ball & Joint Arm 

a.

 

Please use the utmost care and do not use excessive force when assembling and disassembling the different 
accessories, in order to not cause any damage to the products.

 

b.

 

It is advisable to mount the 

EyeGrabber

 on the arm prior to installing the arm on the housing tray or handle. 

 

c.

 

Remove the screws from the T2 Connector so that the two parts of the T2 Connector are disconnected. Please 
note that there are two sets of screws included in the kit. The type of screws compatible with your arm 
depends on the model of the arm. In general, longer screws are compatible with wider arms, such as Fantasea  

T2 Connector

 

Set of 2 shorter screws

 

EyeGrabber Canon G Series

 

Summary of Contents for BigEye Lens S95

Page 1: ... with any of the lens accessories mentioned above still allows mounting these lens accessories on the EyeGrabber Any of the lens accessories mentioned above can still be mounted on the EyeGrabber when color correction inserts are installed inside Please note that this EyeGrabber is not compatible with the RedEye Filter G7 G9 Cat No 5203 Included in the Kit Instructions for Use 1 Assembling the Eye...

Page 2: ...inside in front of the arm so that the screws are aligned with the two holes or slots in the arm Insert the screws through the holes or slots of the arm image 3 Any resistance encountered might be due to improper alignment of the holes on the Flex arm or due to the resistance of the Nylon support line found inside the Flex arm In such a case please repeat step 1c and make sure the support line doe...

Page 3: ...e 2 Installing and Removing Lens Accessories from the EyeGrabber a Installing and removing lens accessories from the EyeGrabber during the dive is the same as when installing and removing from the housing lens port In order to install the lens accessory on the EyeGrabber first hold it in your hand so it is aligned with the EyeGrabber image 6 Place the lens over the EyeGrabber and follow by securin...

Page 4: ... if you need warranty service The following conditions apply 1 This warranty extends to the original purchaser only It is not assignable or transferable 2 The warranty does not cover damage resulting from misuse abuse negligence or accidents Proper maintenance of the Product is the responsibility of the owner 3 The warranty does not cover damage directly or indirectly resulting from the use of una...

Reviews: