1
IMPO
RTAN
T:
Go to www
.extron.com
for the
complete user guide
, installation
instructions,
and specifications.
Retractor SM • Installation Guide
This guide provides basic instructions for an experienced technician to quickly install the Extron
Retractor SM Show Me
®
cable retraction modules in an Extron TeamWork
®
Collaboration System and
in compatible Cable Cubby enclosures.
Additional instructions are available in the
TeamWork Collaboration System Installation Guide
and the
installation guides for the individual Cable Cubby
®
enclosures and the
Retractor SM User Guide
. All
are available at
www.extron.com
.
NOTE:
For information on safety guidelines, regulatory compliances, EMI/EMF compatibility,
accessibility, and related topics, see the
Extron Safety and Regulatory Compliance Guide
on the Extron website.
Planning
Retractor SM modules can be mounted in a horizontal, vertical, or angular orientation depending upon under‑table clearance and
accessibility.
Horizontal mounting
is recommended to provide maximum legroom and to protect the Retractors against accidental damage.
Be certain the Horizontal Mounting Bracket can be fastened under the table or on a table support without bending the pulley
system or forcing it from a perpendicular angle with the enclosure (see the
Top View
diagram on page 3).
Vertical mounting
is used where insufficient under‑table space exists for horizontal mounting or where under‑table access is
limited. Ensure the Retractor SM modules hang freely without touching the floor and are not obstructed under the table.
Angular mounting
is used where insufficient under‑table space exists for horizontal mounting and tabletop to floor clearance
prevents vertical mounting. An additional mounting hole allows installation at an angle providing extra floor clearance.
•
For horizontal mounting, a Retractor SM Horizontal Bracket Kit is required.
•
A Retractor SM Filler Module is required to occupy unused Retractor space.
•
Depending on the enclosure, various Retractor SM Mounts are available, both Triple and Quad.
NOTE:
See the
Extron website
for a list of compatible Retractor SM Mounts and brackets to suit the application and
enclosure.
Mounting kits, bracket kits, filler modules, and accessories are available at
www.extron.com
.
For new installations, to determine the best location for the enclosure, keep in mind the under‑table space required for the
retraction system. Refer to the enclosure installation guide for mounting.
NOTE:
Before starting an installation, determine if additional hardware is needed.
Required Tools and Additional Accessories
Horizontal Mounting
Bracket (Optional)
Retractor SM
Mount - Triple
Retractor SM
Mount - Quad (x2)
-or-
Cable Cubby 1200 and Cable Cubby 1400
Retractor SM
Mount - Triple
Cable Cubby 500 and Cable Cubby 700
(x4)
(x4)
(x2)
(x2)
(x3)
Filler Module
(Optional)
(x2)
( 2))
Tape Measure
Phillips Screw Driver
Zip Ties
Marking Pen
Tweeker
