![background image](http://html.mh-extra.com/html/eventide/h8000fw/h8000fw_quick-reference-manual_2442477001.webp)
Wet/Dry Mix
All eight channels in both Machines allow for independent wet/dry mixes. To adjust one or more of these mixes:
1. Press LEVELS. All eight channels are selected as default allowing you to easily adjust them all simultaneously. Use
the cursor keys to select channels individually.
2. Use the big knob or the keypad to change the settings.
From this page, you'll also find pages of settings for adjusting input and output levels as well as metering.
Bypass
To change how the BYPASS button works, press LEVELS two times, then the
bypass
soft key. Your choices here will
determine what happens when you press the BYPASS button.
Sample Rate
Pressing SETUP will take you to the first of many digital I/O and system pages. From here, you can determine your
sample rate, as well as the inputs that provide digital clock. Note that all digital inputs must match the selected
rate or the corresponding LED will flash to indicate loss of lock.
Routing Presets
The quickest way to set up your analog and digital I/O is by utilizing the routing presets.
1. Press and hold the PROGRAM button to access the routing presets.
2. Scroll using the big knob and use SELECT to make your choice. This will automatically set up your I/O for you.
Advanced Routing
If you can't find your particular I/O configuration using the routing presets, you'll need to set up a custom
configuration manually. For each of these steps, repeatedly pressing the soft key being referred to will step through
the multiple pages for each type of assignment.
1. Press SETUP, then press the
inputs
soft key. This input routing page assigns physical rear panel inputs to the eight
channels which feed the two DSP Machines. These channels are identified by
->IN1
through
->IN8
.
2. Next, assign these channels to the two DSP Machines. Press
dsp A
and adjust the settings to determine what is
fed into DSP A. You can select the sources assigned in step 1, or choose the outputs of each Machine as an input
to DSP A. Repeat this for
dsp B
to determine which channels will feed DSP B.
3. Now, choose the outputs that will feed the physical rear panel connectors by pressing the
outputs
soft key.
Pressing this key repeatedly allows access to all of the possible output options in the H8000FW.
You can also adjust analog and digital I/O levels for all eight channels via the LEVELS pages. Simply press LEVELS,
then repeatedly press the
inputs
or
outputs
soft keys to find what you're looking for.
For the ultimate in flexibility, the H8000FW offers storage locations for saving your customized routing configurations
either internally or on a Compcat Flash or PCMCIA card. Press and hold the PROGRAM button to access the routing
presets. Press this button once more and a
Save
soft key takes you to the save routing page. From here, you can
name and save your custom routing configuration.
H8000FW
Quick Reference
Guide
©2008 Eventide Inc. One Alsan Way, Little Ferry, NJ 07643 USA.
Eventide is a registered trademark of Eventide, Inc.
P/N 141106 Rev B
Get the most out of the H8000FW!
Keep this card handy. When you need a quick solution, but don't want to lug out the full manual, it covers the
operational basics and is a good reference for that hard-to-remember key press or essential function.
Getting Around The Front Panel
Everything you need to do can be accessed through the small number of keys on the H8000FW's front panel. Most
keys will reveal additional features if you press them repeatedly.
C
¥ The BYPASS key will toggle the state of bypass with the status reflected via the A/B LEDs. You can alter how this
button functions from the
Bypass
page within the LEVELS parameters.
D
¥ The four SOFT KEYS located below the display select the function named in text above. Many functions will be
organized on one or more pages that can be accessed by pressing the associated Soft Key repeatedly.
E
¥ The PROCESSOR A/B key always toggles between the two digital signal processing Machines unless they have
been unified into one monolithic DSP powerhouse.
F
¥ The PROGRAM key takes you to the preset search, sort, load, and save features. Holding this key calls up the
Routing presets that make total I/O save and recall a breeze.
G
¥ The PARAMETER key brings up the effect parameter pages where you can make edits to any preset. This is the
mode that is entered after a Program is loaded. Keep pressing this key to access the many pages of parameters.
H
¥ The SELECT key acts as the ENTER key on a keyboard, executing the function highlighted on-screen. You can
also hold it to remote the currently selected parameter.
I-K
¥ The four CURSOR keys, the KNOB , and NUMERIC KEYPAD are used to navigate the display and enter
values.
L
¥ The LEVELS key accesses the parameters that adjust the unit's mix settings, input, and output levels, as well as
the source for the front panel level meters.
M
¥ The SETUP key keeps all the system-wide routing, remote control, and MIDI functions in one organized area.
Press repeatedly to step through the many pages of parameters.
Program Loading
To load an H8000FW Program, press the PROGRAM key to be sure its LED is lit, turn the knob to select a Program to
load, then press the SELECT key once.
Program Search
The H8000FW offers a powerful Program Sort and Search feature to find what you're looking for fast. To ensure you
load your choice into the right Machine, select one using the PROCESSOR A/B key. You'll see A or B in the upper left
of the display as you repeatedly press this button. Choose the Machine you want to work with.
1. Press PROGRAM until you see
criteria
at the bottom right corner of the display. Press the
criteria
soft key to
select this page.
2. Select any of the Sort and Search settings to narrow your choice. Use the big knob or the keypad to change the
settings.
3. Press the
List
soft key to return to the Program listing and display your refined choices.
4. Use the
<--
and
-->
soft keys to jump through the categories you selected. Use the big knob or keypad to step
through the Programs in each category.
The Front Panel
H8000FW
Quick Reference
Guide
A B
B
C
D
E
F
G
H
I
I
J
J
K
K
L
M