Man
Prog
Auto + t
SHT-6G
cos φ ≥ 0.95
M
M
HAL.230V
K
M
M
AC12
x
DC14
x
AC1
250V / 16A
AC13
x
AC2
250V / 5A
AC14
250V / 6A
AC3
250V / 3A
AC15
250V / 6A
AC5b
1000W
DC5
24V / 2A
AC6a
x
DC12
24V / 6A
AC7b
250V / 3A
DC13
24V / 2A
02-25/2017 Rev.: 4
1/4
ON
/
OFF
ON
/
OFF
#
ON
/
OFF
6
1
2
3
5
7
8
4
9
10
11
12
13
14
15
17
19
20
16
18
Made in Czech Republic
1
8:52
1
6--SEP-- 10
GPS
A2 16 15 18
A1 G B1 B2
Un
GPSR-1
15
16
A2
A1
B2
B1
18
G
ESC
ESC
ELKO EP, s.r.o.
Palackého 493
769 01 Holešov, Všetuly
Czech Republic
Tel.: +420 573 514 211
e-mail: [email protected]
www.elkoep.com
Time switch with GPS control
Characteristics
Symbol
Type of load
Mat. contacts AgSnO
2
,
contact 16A
Type of load
Mat. contacts AgSnO
2
,
contact 16A
AC5a
uncompensated
230V / 3A (690VA)
DC1
24V / 10A
AC5a
compensated
230V / 3A (690VA)
to max. input C=14uF
DC3
24V / 3A
EN
Connection
Description
1. Supply voltage terminal (A1)
2. Display with back-light
3. Place for seal
4. Plug-In with battery backup
5. Supply voltage terminal (A2)
6. Connectors for the GPSR-1 receiver
7. Control buttons
8. Output - channel (16-15-18)
9. Indicates the day in the week
10. Indication
11. Indication of date / setting menu *
12. Time display **
13. Control button PRG / +
14. Reset
15. Control button MAN / -
16. Operating modes indication
17. 12/24 hours format /
18. Indication of the switch program
19. Control button MAN2 / ESC
20. Control button OK
Mode precendence
mode with the highest priority
manual control
holiday mode
time program
Prog
Mode precedence
Display
Output mode
Time switch with GPS control is used for the automatic real-time controlling of appliances. The
timer operates all year round without the need for continuous maintenance, with minimum op-
erating costs and maximum savings of electrical energy (for example for turning on heating,
pumps, ventilators, public lighting etc.). Appliances can be controlled in regular time cycles or
based on a pre-set programme.
Time switch SHT-6 is synchronized by a GPS signal using external receiver GPSR-1. Time switch
can operate independently without a GPS receiver. In the case of a power supply interruption,
the timer retains all set values required for its reliable activation after power is restored.
- Switching modes:
-
Auto
- automatic switching mode:
-
Programme
- switching based on a programme (astro or time).
-
Random
- switches randomly in a 10-120 minute interval.
-
Holiday
#
- holiday mode - option of setting up a period for which the timer will be blocked,
i.e. will not switch based on the set programmes.
-
Manual
- manual mode - option of controlling the individual output relay manually
- Options of the automatic switching programme:
-
Time programme
- switching based on a pre-set time programme
- Memory capacity for 100 time programmes.
- Programming can be performed both when power is on or in backup mode.
- Output relays only operate with a supply voltage of AC 230 V.
- Menu display selection - CZ / SK / EN / ES / PL / HU / RU (default factory setting EN).
- Selection of automatic switching between summer / winter time based on location.
- Backlit LCD display.
- Simple and easy setup using 4 control buttons.
- Sealable transparent cover on the front panel.
- The timer has a backup battery that preserves data in case of a power supply failure (reserve
backup time up to 3 years).
- Supply voltage: AC 230 V.
- 2-module, mounted onto a DIN rail, clamping terminals.
- After plugging the timer in for the fi rst time, the current time, date and geographic location
must be set for correct operation of the clock.
Settings can be done:
- manually: only if the GPS signal is disabled
- automatically: if the receiver GPSR-1 is connected and GPS signal is enabled.
