EdenPURE A5970 Owner'S Manual Download

Page: 1 / 11

PLEASE READ
AND SAVE THESE

INSTRUCTIONS

Model No. A5970

Owner’s Manual

Bio SpeedCLEAN

XL200

TROUBLESHOOTING TIPS

If there is no power/the machine doesn’t turn on, it will need to be

charged.

If the bristles are not rotating, they will need to be cleaned.

If you are charging the battery and the charging light isn’t on, the

cord may not be inserted properly into the charging port. Try

pushing it in farther.

If the battery won’t hold a charge, you may need a replacement

battery. Go to www.edenpuresupport.com to purchase one.

Th is vacuum comes with a 1 year limited component warranty.

If your unit does not appear to be working properly, please

contact our service center by calling 1-800-225-6595. Prior to

your call, we encourage you to visit our service related website

www.edenpuresupport.com for troubleshooting tips and service

instructions if needed.

EdenPURE

7800 Whipple Avenue NW

N. Canton, OH 44720

[email protected]

Model Number

A5970

Volts 25.9V
Power 380W
Input

100-240V – 50/60Hz 0.5A

Output 2500mAh

PRODUCT SPECIFICATIONS

Summary of Contents for A5970












Search results

Summary of Contents for A5970

Reviews:

Related manuals for A5970

Brands by name

Popular brands

EdenPURE A5970, Owner'S Manual

Search results

Summary of Contents for A5970

Reviews:

Related manuals for A5970

Brands by name

Popular brands