©2005 Edelbrock Corporation
Rev. 1/05
Catalog #65812 & 65813
DA/mc
Page 1 of 3
EDELBROCK HEADERS
CATALOG #65812 (Ceramic-Coated) & #65813 (Ti-Tech Coated)
for 1972-1991 Jeep, Full Size Cherokee, Wagoneer & J-Series Pick-Up,
1972-1981 Jeep CJ5, CJ7, & CJ8
1970-1979 AMC, AMX, Javelin, Rebel, Matador
with 304, 360, 390, or 401 with A.I.R
.
INSTALLATION INSTRUCTIONS
PLEASE study these instructions carefully before installing your Headers. If you have any questions, please call our
Technical Hotline at:
1-800-416-8628
from 7:00 am - 5:00 pm, Monday-Friday, Pacific Standard Time or
e-mail us at
.
HEADERS:
These components are designed to improve the exhaust efficiency of the AMC/Jeep 304, 360, 390, & 401 cu.
in. V8.
Most applications do not require welding for installation
and retains all O.E.M. emissions equipment.
NOTE:
These headers
will not
work on early rectangular port heads.
SUGGESTED TOOLS FOR INSTALLATION:
❑
3/8" ratchet socket set with extensions and universal
❑
Combination set of open-end wrenches
❑
Jackstands, screwdrivers, pliers, crescent wrench, etc.
❑
Liquid penetrant, (GM #1052627) anti-seize compound (GM #5613695)
SPECIAL NOTICE:
This Edelbrock part has received an Executive Order (E.O. #) from the California Air Resources Board
(C.A.R.B.) making it legal for street use on pollution-controlled motor vehicles in all 50 states. To assist you with emissions
equipment certification, we have included a silver fan shroud decal to help testing personnel verify that this part is a legal
replacement part on the vehicle for which it is cataloged. The adhesive-backed decal should be affixed to your fan shroud
next to the existing emission and engine specification decal. Do not cover your original equipment specification decal with
the Edelbrock fan shroud decal.
Notes on Specific Applications:
These shorty headers are designed to be a direct replacement for OEM cast iron
manifolds, known as high flow manifolds used on many AMC cars and Jeep vehicles. Some of the vehicles listed above
came with different exhaust manifolds on one side and will require modification to exhaust down pipe on one side (see
below).
Jeep Application Note:
When installing this system on some 1981-1991 Jeep Grand Wagoneer, 1981-1983
Cherokee, or 1981-1988 J series pick-up, check the location of the outlet of the left side exhaust manifold. If the outlet
is located under the 3rd spark plug, no modification will be needed. If the outlet is directly under the 4th spark plug,
the stock down pipe will require modification.
AMC Car Application Note:
When installing this system on 1970-1979 AMC cars with
(Type 1)
right side manifold,
no modification is needed. If your car has
(Type 2)
right side manifold, modification to stock down pipe is required.
TYPE 1
TYPE 2
