Dynorbital
®
Silver Supreme
12,000 RPM Random Orbital Sander
SAFETY, OPERATION AND MAINTENANCE - SAVE THIS DOCUMENT, EDUCATE ALL PERSONNEL
Parts Page Reorder No. PD10•36
Effective October, 2010
Supersedes PD09•02
SAFETY INSTRUCTIONS
Carefully Read all instructions before operating or servicing any Dynabrade
®
Abrasive Power Tool.
Products offered by Dynabrade are not to be modified, converted or otherwise altered from the original design.
DO NOT USE tool for anything other than its intended applications.
Training:
Proper care, maintenance, and storage of your air tool will maximize tools performance and reduce chance for accident.
Employer's Responsibility:
Provide operators with safety instructions and training for safe use of tools and accessories.
REPORT TO YOUR SUPERVISOR ANY CONDITION OF THE TOOL, ACCESSORIES, OR OPERATION YOU CONSIDER UNSAFE.
Read and understand tool manual before
work starts to reduce risk of injury to
operator, visitors, and tool.
Eye protection must be worn
at all times, eye protection to
conform to ANSI Z87.1.
Respiratory protection to be used when
exposed to contaminants that exceed the
applicable threshold limit values required by law.
Air line hazard, pressurized supply lines and flexible hoses
can cause serious injury. Do not use damaged, frayed or
deteriorated air hoses and fittings.
WARNING
Ear protection to be worn when exposure to sound,
exceeds the limits of applicable Federal, State or local
statues, ordinances and/or regulations.
Read and understand this tool manual before operating your air tool. Follow all safety rules for the protection of operating personnel as well as
adjacent areas. Always operate, inspect and maintain this tool in accordance with the American National Standards Institute (ANSI) Safety Code
for Portable Air Tools – B186.1. For additional safety information, refer to Safety Requirements for the Use, Care and Protection of Abrasive
Wheels – ANSI B7.1, Code of Federal Regulation – CFR 29 Part 1910, European Committee for Standards (EN) Hand Held Non-Electric Power
Tools – Safety Requirements and applicable State and Local Regulations.
Some dust created by sanding, grinding, drilling, and other construction activities contain chemicals known to cause cancer, birth defects
or other reproductive harm. Some examples of these chemicals are:
•
Lead from lead-based paints
•
Crystalline silica from bricks and cement and other masonry products
•
Arsenic and chromium from chemically treated lumber
Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well
ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles.
Practice safety requirements. Work alert,
have proper attire, and do not operate tools under
the influence of alcohol or drugs.
FIND THE MOST CURRENT OFFERING OF SUPPORT DOCUMENTS AND ACCESSORIES AT WWW.DYNABRADE.COM
Tool Intent:
Dynorbital
®
Silver Supreme Sanders are used for sanding and finishing a variety of materials including wood, metal, plastic, fiberglass,
solid surfaces, composites, rubber, glass and stone.
CAREFULLY READ AND UNDERSTAND
PNEUMATIC TOOL SAFETY GUIDELINES (P/N 00001676) BEFORE HANDLING OR USING TOOL.
Model 69020
Shown
Models:
3/8" Orbit
3/16" Orbit
3/32" Orbit
69000 69010
69015 69025
69030 69040
69003 69013
69018 69028
69033 69043
69004 69014
69019 69029
69034 69044
69005 69060
69020 69061
69035 69062
69008 69100
69023 69105
69038 69110
69009 69103
69024 69108
69039 69113
69104
69109
69114
