background image

49-109H F533 

Dri-Eaz Products, Inc. 

 

Owner’s Manual 

DriTec

 4000i Desiccant Dehumidifier

 

 

Model F533 

DRI-EAZ PRODUCTS, INC.  

15180 Josh Wilson Road, Burlington, WA 98233 

Phone: 800-932-3030

 

Fax: 360-757-7950

 

 

www.LegendBrandsRestoration.com

  

The Dri-Eaz

®

 DriTec 4000i desiccant dehumidifier reduces humidity in enclosed environments by remov-

ing water vapor from the air. The 4000i is ideal for water damage restoration, structural drying, construc-
tion, and is especially suited for removing moisture from structural materials and contents in cold tem-
peratures or low to medium humidity environments where refrigerant dehumidifiers work less efficiently.  

Patents: http://www.LBpatents.com 

R E A D   A N D   S A V E   T H E S E   I N S T R U C T I O N S

 

 

 

 

 

Read and understand manual before operating. 

 

 

 

 

 

WARNING! Do not alter or modify the unit in any 
way. Use only replacement parts authorized by Dri-
Eaz. Modifications or use of unapproved parts could 
create a hazard and will void your warranty. Contact 
your Dri-Eaz location for assistance. 

WARNING! Electric shock hazard, rotating fan, hot 
surface hazards. Unplug unit before opening cover 
for cleaning or servicing. Unit must be grounded. 

  Inspect the power cord before use. If cord is dam-

aged, do not use. Always grasp the plug (not the 
cord) to unplug. 

  Insert three-prong plug on power cord into a match-

ing electrically grounded outlet. Do not use adapter. 
Never cut off third prong. Do not use an extension 
cord.  

  The unit must be operated on a 115V/60Hz circuit 

protected by a Ground Fault Circuit Interrupter 
(GFCI) device.  

  Keep motor and wiring dry. 

  Do not attempt to repair the unit. For Authorized 

Service Centers, contact Dri-Eaz.  

BEFORE YOU BEGIN 

Warranty registration 

Visit 

warranty.LegendBrandsRestoration.com

 to register 

your purchase. Registration allows us to better assist 
you with using, maintaining or servicing your equipment 
and to contact you in case we have important safety in-
formation concerning your Dri-Eaz product. If you deter-
mine service is required, have your equipment model, 
serial number and original proof of purchase available 
and call your distributor for assistance with obtaining a 
return material authorization (RMA). 

 

GROUNDING INSTRUCTIONS 

This unit’s plugs must be inserted into an appropriate 
outlet that is properly installed and grounded in accord-
ance with all local codes and ordinances. 

WARNING! Improper connection of the equipment-
grounding conductor can result in a risk of electric 
shock. Check with a qualified electrician or service 
person if you are in doubt as to whether the outlets 
are properly grounded. Do not modify the plugs pro-
vided with the appliance 

– if the plugs do not fit the 

WARNING

 

CORRECT PLUG REMOVAL 

Grasp IEC plug and pull straight out 

IMPORTANT: Damage to IEC receptacle or 
dehumidifier resulting from improper re-
moval of the power cord is not covered by 
warranty. The IEC power cord is a wear item 
and is not covered by warranty. 

Summary of Contents for DriTec 4000i F533






























Reviews: