7354
LT-0956 1.01 © 2007 Digital Monitoring Products, Inc.
USERS GUIDE
SIMPLE TO USE
The easy-to-understand icons, combined with a three-character display,
provides visual feedback enabling simple arming, disarming, and a
variety of other functions.
CODELESS ARMING AND DISARMING
The innovative 7363 Thinline Icon keypad contains a built-in DMP
proximity reader that allows you to simply present a proximity
credential to the keypad to arm or disarm the system without the need
to remember a user code.
USER-FRIENDLY SHORTCUT KEYS
Twelve one-button shortcut keys simplify operation providing access
to a variety of functions. For example, pressing the HOME key for two
seconds arms your system when you're at home for the evening. The
keys enable users to quickly arm, monitor zones, easy exit, test or reset
the system and a variety of other functions.
PLEASE TAKE A MOMENT
To learn the range of features of your system, please read through this
user’s guide thoroughly. All icons and keypad operation are completely
described.
System Functions continued
Resetting Sensors
Use this function to reset the smoke detectors after an alarm has
occurred. Press and hold the RESET (2) key for two seconds. The Flame
icon will clear from the display when the Sensor Reset operation is
complete and the smoke detectors are reset.
User Codes
+[your code]+[user [user code]+[level]
This function allows you to Add or Delete user codes. Each user is
assigned 3 settings:
The
User Number
is how the system identifies a user.
The
User Code
is the four digit number a user enters into the keypad to
arm, disarm or to perform other system operations.
The
User Level
- the user is also assigned a level of authority (Master,
Standard, Limited, or Scheduled) to determine the functions the user
can access. See below for User Code authority levels.
• Press and hold the CODE key (4) until the keypad beeps once and
enter your user code.
• Enter the user number to add or delete.
XRSuper6 = 01 - 16
XR20 = 01 - 32
XR40 = 01 - 64
• Enter the four-digit user code to assign to the user number or 0000 to
delete an existing user.
• Enter the authority level (1-4)
Level 1 = Scheduled User (XR40 only)
The Scheduled authority level performs all the system function
of the Limited level during a valid schedule with the exception of
turning Outputs on or off and System Test. Disarming is allowed
outside of a schedule, but an Unauthorized Entry message is sent
to your monitoring station.
Level 2 = Limited User (XR40 only)
The Limited authority level can perform all the system functions
of the Standard level with the exception of Bypassing zones and
Extending schedules.
Level 3 = Standard User (XRS6/XR20/XR40)
The Standard authority level can perform all system functions
except adding or deleting user codes.
Level 4 = Master User in (XRS6/XR20/XR40)
The Master authority level can perform all system functions.
Zone Status
Use this function to display burglary protection zones that are faulted
while the system is disarmed. Any faulted burglary zones are shown
in the 3-character display allowing you to correct the problem before
arming.
System Test
System Test is used to test the battery, alarm bell or siren, and
monitoring station communication. Press and hold the TEST (
) key
for two seconds. The System Test function begins automatically as
soon as you select it.
Test in Progress (tSt)
The system is currently being tested by an installation or
service technician. The bell sounds for two seconds and
then the communication test begins.
Transmit Good (tgd)
The communication portion of the system test was
successful.
Transmit Failed (tFL)
The communication portion of the system test failed to
communicate to the Central Station.
System Displays (3-Character)
Armed (A)
The system is armed ALL or AWAY.
Alarm not Sent (Abt)
The alarm signal was aborted and not sent to the central
station because a user code was entered to disarm the
system or CANCEL was selected.
Alarm Cancelled (ALC)
An alarm signal just sent to the central station was
cancelled because a user code was entered after the
alarm was sent or CANCEL was selected.
Home (H)
The system is armed HOME.
Perimeter (P)
The system is armed Perimeter. (PERIM)
Sleep (S)
The system is armed SLEEP.
System Busy (bSY)
The system is performing other functions at this time.
Wireless Jammed Alarm (rFA)/Trouble (rFJ)
Your system may be programmed for wireless interference
detection and, if displayed, your wireless receiver has
detected an interfering signal.
Wireless Trouble (rFt)
Your wireless receiver is unplugged or not operating
properly.
Thinline™ Series Icon Keypads
