background image

T W O - W A Y   L C D   A U T O M A T I C / M A N U A L  
T R A N S M I S S I O N   R E M O T E   S T A R T E R   W I T H   F U L L  
A L A R M   S Y S T E M  

INDUSTRY CANADA USER NOTICE: 

Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must 

accept any interference, including interference that may cause undesired operation of the device. 

To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the 

equivalent isotropically radiated power (EIRP) is not more than that required for successful communication. 

NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to 
this equipment. Such modifications could void the user's authority to operate the equipment. 

Doc#: 100827 

Rev:1.5 

© 2010 

-PS-7870TWE-FM- -FcN- Canada 

 

PS-7870TWE-FM 

 

User Guide 

 
 
 
 

 

WARNING! 

It is the responsibility of the vehicle operators to ensure their vehicle 
is parked in a safe and responsible manner. 

1.

 

a) Manual transmission: When leaving the vehicle, it is the user’s 
responsibility to ensure that the gearshift lever is in the NEUTRAL 
position and the parking brake is engaged in order to avoid accidents 
upon remote starting. 
b) Automatic transmission: When leaving the vehicle, it is the user’s 
responsibility to ensure that the gearshift lever is in “Park” in order to 
avoid accidents upon remote starting. 
(Note: Make sure that the automatic vehicle cannot start in "Drive".) 

2.

 

It is the user's responsibility to ensure that the remote starter is 
disabled or put into valet mode before servicing.

 

 

 
 
 
 

Designed & engineered in Canada 

 

 

Battery Low Voltage Warning 

Once the battery is weak, the LCD remote will display a battery low voltage icon 
and an “L-BAT” indication with 2 beeps to warn the user to charge it. 

Summary of Contents for PS-7870TWE-FM























Reviews: