Congratulations on purchasing the most reliable check scanner in the industry, which features Best Read™ image quality, Best Read™ MICR, and Infinity™ check feed.
(for models with endorsement option)
Step #2: Install the Inkjet Cartridge
Step #1: Check Scanner Components
TellerScan scanner.
Power supply & electrical supply cord.
Inkjet cartridge.
(for models with endorsement option)
USB 2.0 cable.
Grasp the protective plastic bag as a handle
to remove the scanner from the box.
Then remove the scanner from the bag.
Step #3: Connect the Scanner
Position the scanner for easy access to the
entry and exit trays. The scanner also needs
to be at least 6" away from any power
supply to avoid interference with the
scanner's magnetic read head.
Connect the power supply cord to the
back of the scanner.
Connect the electrical supply cord to the
power supply, then plug the electrical
supply cord into an electrical outlet.
NOTE:
Confirm that the TellerScan USB
Device drivers have been installed before
connecting the USB cable to the PC.
If you have not installed the drivers, check
with your bank representative.
Connect the USB cable, first to the
scanner (below) and then to the PC.
On / Off
Switch
USB Port
Power
Remove the center cover by lifting
vertically.
Open the inkjet cartridge pouch and
remove the tape seal on the cartridge.
Carefully insert the cartridge at a slight
downward angle and snap into place.
Replace the center cover.
Scanner
Inkjet Cartridge
Power Supply
Electrical Supply Cord
USB Cable
Back of Scanner
Center Cover
