![background image](http://html1.mh-extra.com/html/davey/powermaster-250/powermaster-250_installation-and-operating-instructions_3930227001.webp)
AUSTRALIA
Customer Service Centre
6 Lakeview Drive,
Scoresby, Australia 3179
Ph:
1300 232 839
Fax:
1300 369 119
Email: [email protected]
Website: davey.com.au
Davey Water Products Pty Ltd
Member of the GUD Group
ABN 18 066 327 517
NEW ZEALAND
Customer Service Centre
7 Rockridge Avenue,
Penrose, Auckland 1061
Ph:
0800 654 333
Fax:
0800 654 334
Email: [email protected]
Website: daveynz.co.nz
™ Davey is a trademark of Davey Water Pr
oducts Pty Ltd. © Davey Water Pr
oducts Pty Ltd 2016.
Davey P
ow
erMaster 200, 250, 350, 450
(Including 415V 3 phase model)
INSTALLA
TION AND
OPERATING INSTR
UCTIONS
Please pass these instructions on to the owner of this equipment.
The installation of this product should be carried out by a person knowledgable
in swimming pool plumbing requirements following the Installation Instructions
provided in this manual.
– 2 –
Prior to using this pump you must ensure that:
• The pump is installed in a safe and dry environment
• The pump enclosure has adequate drainage in the event of leakage
• Any transport plugs are removed
• The pipe-work is correctly sealed and supported
• The pump is primed correctly
• The power supply is correctly connected
• All steps have been taken for safe operation
Appropriate details for all of these items are contained in the following Installation
and Operating Instructions. Read these in their entirety before switching on this
pump. If you are uncertain as to any of these Installation and Operating Instructions
please contact your Davey Dealer or the appropriate Davey office as listed on the
back of this document.
Congratulations on your purchase of a quality product from the Davey range of
Pool and Spa Equipment. You are assured of many years of reliable and efficient
performance from your Davey PowerMaster backed by Davey’s three year
guarantee.
Davey PowerMasters have been designed to circulate swimming pool and spa water
in conditions set out in the Australian Standard for swimming pool water quality (AS
3633) or equivalent. They should not be used for any other purpose without first
consulting your Davey Dealer or the Davey Customer Service Centre.
Davey design and build its own electric motors especially for its pumps. The
matched motor and “pumping end” are designed to provide the quietest operation
while delivering maximum water flow.
Davey’s totally enclosed fan-cooled motor incorporates “autostart” overload
protection with a built-in automatic thermostat designed to protect the motor from
overheating.
Every Davey PowerMaster is thoroughly water tested against a number of flow,
pressure, voltage, current and mechanical performance parameters. Davey`s
advanced pump manufacturing technology provides reliable and efficient pumping
performance that lasts and lasts.
Location
The pump should be located as close to the water as practicable and mounted on
a firm base in a well drained position, high enough to prevent any flooding. It is the
installer’s/owners responsibility to locate the pump such that the nameplate can be
easily read and it can readily accessed for service.
Weather Protection
It is recommended that the pump is protected from the weather. Enclosures should
be ventilated to prevent condensation build-up and allow a free flow of air for the fan
cooled motor.
Power Connection
Davey PowerMaster’s are suitable for connection to a nominal 240 (for 415 volt refer
to page 7) volt 50Hz power supply and are equipped with a flex and 3 pin plug. If
a power outlet is not available within 3 metres of the pump, a 3 pin power point in
a safe, dry place, may need to be provided by an electrician. Extension cords are
unsafe around pools - and should be avoided. If the supply cord of this product is
damaged it must be replaced by the Dealer or manufacturer, with genuine Davey
spares.
– 3 –
Pipe Connection
A barrel union is provided for connecting to the piping from the pool.
The pumps are designed to accept the following PVC Pipes:
Model
Inlet PVC
Position
Outlet PVC
Position
PM200/250
40mm
pipe
ID 40mm ID
or 50mm fitting
OD
50mm fitting
OD
PM350
40mm
pipe ID 40mm
pipe ID
or 50mm fitting
OD
50mm fitting
OD
or 50mm pipe
ID
50mm pipe
ID
PM450
50mm
pipe ID 50mm
pipe ID
The use of any pipe smaller than those specified above is not recommended.
Suction piping should be free from all air leaks and any humps and hollows which
cause suction difficulties.
The discharge piping from the pump outlet should be connected to the inlet
connection on the swimming pool filter (usually at the filter control valve).
NOTE: PowerMaster Pool Pumps are fitted with an internal check valve to reduce
reverse flow of water through the pump.
Warning! Ensure that an electrical isolation switch is located with easy
access so that the pump can be switched off in an emergency.
The fittings on this product are constructed of ABS. Some PVC jointing
compounds are incompatible with ABS. Check compound suitability
before use.
Children should be supervised to ensure that they do not play with the
appliance.
Davey Water Products recommends that all installations are fitted with
earth leakage or residual current protection devices.
CAUTION: In the interest of safety, we advise that all brands and types of
pool pumps must be installed in accordance with AS3000 wiring rules or
equivalent.
This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience
and knowledge, unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their safety.
If the pump and filter are located below pool water level, it is necessary
to fit isolating valves in the pipe between the pump and the skimmer box
and in the return pipe from the filter to the pool.
Barrel unions need to be hand tightened. No sealant, glues or silicones are
required.
WARNING:
Failure
to
follow
these
instructions
and
comply
with
all
applicable
codes may
cause
serious
bodily
injury
and/or
property
damage.
Davey Repair or Replacement Guarantee
In the unlikely event in Australia or New Zealand that this Davey product develops any malfunction
within three years of the date of original pur
chase due to faulty materials or manufacture, Davey will
at our option repair or r
eplace it for you free of char
ge, subject to the conditions below.
Should you experience any difficulties with your Davey product, we suggest in the first instance that
you contact the Davey Dealer from which you pur
chased the Davey product. Alter
natively you can
phone our Customer Service line on 1300 232 839 in Australia, or 0800 654 333 in New Zealand, or
send a written letter to Davey at the address listed below
. On receipt of your claim, Davey will seek to
resolve your difficulties or
, if the product is faulty or defective, advise you on how to have your Davey
product r
epaired, obtain a r
eplacement or a refund.
Your Davey Thr
ee Year Guarantee naturally does not cover normal wear or tear
, replacement of
product consumables (i.e. mechanical seals, bearings or capacitors), loss or damage r
esulting
from misuse or negligent handling, impr
oper use for which the product was not designed or
advertised, failure to pr
operly follow the provided installation and operating instructions, failur
e to
carry out maintenance, corrosive or abrasive water or other liquid, lightning or high voltage spikes,
or unauthorised persons attempting repairs. Wher
e applicable, your Davey product must only be
connected to the voltage shown on the nameplate.
Your Davey Thr
ee Year Guarantee does not cover fr
eight or any other costs incurred in making a
claim. Please retain your r
eceipt as proof of pur
chase; you MUST
provide evidence of the date of
original purchase when claiming under the Davey Thr
ee Year Guarantee.
Davey shall not be liable for any loss of profits or any consequential, indir
ect or special loss, damage
or injury of any kind whatsoever arising directly or indir
ectly from Davey pr
oducts. This limitation
does not apply to any liability of Davey for failure to comply with a consumer guarantee applicable to
your Davey product under the Australian or New Zealand legislation and does not affect any rights or
remedies that may be available to you under the Australian or New Zealand Consumer Legislation.
In Australia, you are entitled to a r
eplacement or refund for a major failur
e and for compensation for
any other reasonably for
eseeable loss or damage. You ar
e also entitled to have the goods repair
ed
or replaced if the goods fail to be of acceptable quality and the failur
e does not amount to a major
failure.
Should your Davey product r
equire r
epair or service after the guarantee period; contact your nearest
Davey Dealer or phone the Davey Customer Service Centre on the number listed below
.
For a complete list of Davey Dealers visit our website (davey.com.au) or call:
* Installation and operating instructions ar
e included with the product when pur
chased new.
They may also be found on our website.
P/N 48717-11
48717-11_PowerMaster.indd 1
11/10/2016 4:01 PM