INSTRUCTIONS
©2017 Datalogic S.p.A. and/or its affiliates. All rights reserved.
Datalogic and the Datalogic logo are registered trademarks of
Datalogic S.p.A. in many countries, including the U.S. and the E.U.
Rhino is a trademark of Datalogic S.p.A. and/or its affiliates. All other
brand and product names may be trademarks of their respective
owners.
www.datalogic.com
94ACC0163 Antenna, Roof Mount Dome, 4 dBi, 2.4 to
5.9 GHz
General Features
Antenna, Roof Mount Dome, 4 dBi, 2.4 to 5.9 GHz extends W-Lan connectivity of VMC.
The pack contains the following components
•
1x Top cover 50mm with RP TNC
connector
•
1x Antenna cable RP-TNC, N 3 m
•
1x Omnidirectional calotte 4 dBi, 2,4 to
5,9 GHz, N
Assembling of Omnidirectional calotte 4 dBi, 2.4 to 5.9 GHz
The Omnidirectional calotte 4 dBi, 2.4 to 5.9
GHz must be installed via 2 screws. The
maximum diameter of the screws shouldn’t be
taller than 4 mm. To connect the antenna cable
RP-TNC, N 3 m properly there must be a whole
with a diameter between 35 mm to 40 mm.
Connect Omnidirectional calotte 4 dBi, 2.4 to 5.9 GHz with VMC
The connector with the smaller outer diameter
must be connected to the VMC.
The connector with the bigger outer diameter
must be connected to the Omnidirectional calotte
4 dBi, 2.4 to 5.9 GHz
Rhino II
Antenna
Screws not
included
