CY3280-CPM1 CapSense
®
Plus Module
Development Kit Quick Start Guide
Doc. # 001-51974 Rev. *A
Cypress Semiconductor
198 Champion Court
San Jose, CA 95134-1709
Phone (USA): 800.858.1810
Phone (Intnl): 408.943.2600
http://www.cypress.com
©2009-2011 Cypress Semiconductor Corporation. PSoC and CapSense are registered trademarks of Cypress
Semiconductor Corp. All other trademarks or registered trademarks referenced herein are property of the
respective corporations.
Cypress Semiconductor Corporation
198 Champion Ct., San Jose, CA 95134 USA
www.cypress.com
If you have questions, call
Cypress Customer Support
+1 (800) 541-4736 Ext. 8 (in the USA),
+1 (408) 943-2600 Ext. 8 (International),
or visit
www.cypress.com/go/support
Doc. # 001-51974 Rev. *A
3.
Program the RTC lab hex file to the CY3280-22x45 board. Refer to the quick start
guide of CY3280-22x45 UCC board for detailed program procedure.
4.
Unplug the MiniProg from the CY3280-22x45 board.
5.
Disconnect JP3 and JP4 of CY3280-CPM1 board.
6.
Power the CY3280-22x45 board.
5. Test the Board
The elapsed time is displayed on the LED panel in real time. You can also test the
board with the other code examples available on the CD.
6. Design Support and Resources
A wealth of information about PSoC Designer™ and CapSense are available on
www.cypress.com
. For knowledge base articles, customer forums, and online
application support, visit
www.cypress.com/support
.
Downloaded from
