![background image](http://html1.mh-extra.com/html/curt/cm-58967/cm-58967_installation-manual_2698931001.webp)
58967-INS-RB
•
PAGE 1
Wiring Location Guide*
for Trucks (T)
T1 Behind driver side taillight housing
T2 Behind passenger side taillight housing
T3 Behind driver side rear bumper
T4 Behind center of rear bumper fascia
T5 Behind passenger side rear bumper
T2
T4
T5
T1
T3
* Representative vehicle shown
INSTALLATION MANUAL
Tools Required
Drill
Flathead screwdriver
Drill bit, 3/32"
Cutting tool
Wiring Location(s)
T3 and T5
Level of Difficulty
Easy
WARNING
Do not exceed product rating or tow vehicle lamp load rating, whichever is lower.
Product Registration and Warranty
CURT Group stands behind our products with industry-leading warranties.
Provide feedback and help us to improve our products by registering your purchase at:
warranty.curtgroup.com/surveys
Maintenance
Periodic inspection of all wires and connections should be performed
to ensure there is no visible damage or loose connections.
NOTICE
Before you begin installation, read all instructions thoroughly.
Proper tools will improve the quality of installation and reduce the time required.
All steps must be followed to ensure the product will function properly. Once installed,
test for proper function by using a test light or connecting a properly wired trailer.
Product Photo
Included Parts