Windshield
Quick Start Guide
Cobra iRadar uses
Bluetooth
®
wireless technology to
connect to your iOS or Android
™
device. Through this
connection, the Cobra iRadar app displays radar/laser alerts,
lets you customize detector settings, and provides access to
the iRadar Community.
Cobra iRadar is made for
:
iPod touch (5th Generation, 4th Generation)
iPhone 5s, iPhone 5c, iPhone 5
iPhone 4s, iPhone 4
Android
®
smartphones running OS 2.1 or higher
Mounting iRadar
iRadar should be mounted on the windshield or dashboard
of your vehicle. 2 mounting options are included:
Suction Cup Mount
–
This is the best option for portability and moving the
detector from car to car. Make sure to thoroughly clean
the suction cups and windshield mounting area to insure
a tight seal.
Hook and Loop Fastener
–
Included for dashboard mounting.
Your detector should be
mounted so that it is oriented
parallel to the road.
The suction cup mount comes
standard bent at a 45° angle.
The metal is designed to bend
without breaking. Adjust the
angle so when mounted the
detector is level with the road.
Note:
Do not attempt to bend
the mount while the detector
is attached.
Suction Cup Mount
Incorrect Positions
Correct Position
Model iRAD 230
NOTE:
This device complies with part 15 of FCC rules: Operation is subject to the
following two conditions: (
1
) This device may not cause harmful interference, and (
2
)
This device must accept any interference received including interference that may
cause undesired operation.
CAUTION:
Modifications or parts not approved by Cobra Electronics Corporation may
violate FCC Rules and void authority to operate this equipment.
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is
subject to the following two conditions: (
1
) this device may not cause interference, and (
2
)
this device must accept any interference, including interference that may cause undesired
operation of the device.
Follow these simple steps to get your iRadar up
and running:
Hook & Loop Fastener
