1
REMOTE KEYPAD with NFC Tag (KPT-32N, KPT-32N-F1)
April 01st, 2016
z
Identifying the Parts
1. Siren
2. Orange LED: Home Arm Key
3
.
Red LED: Away Arm Key
4. Panic Alarm (if enabled)
- Press both 1 and 3 to trigger panic alarm
5. Fire Alarm (if enabled)
- Press both 4 and 6 to trigger fire alarm
6. Medical Alarm (if enabled)
- Press both 7 and 9 to trigger Medical alarm
7.
¿
Key
- Enter Keypad PIN Code +
¿
Key to enter Test Mode.
8. Keypad Sensor (for tag)
9. NFC Tag
10. # Key
11. Mounting Holes
12. Tamper Switch
<NOTE>
&
A short beep will sound along with key pressing to indicate that the button pressed is valid.
&
A long beep will sound along with key pressing to indicate successful command.
&
4 continuous beeps will sound indicating mistake and the user should repeat the process again.
&
Backlight will be ON for any key pressed or command sent from the Keypad.
z
LED Indicator
z
Red LED (Away Arm Key)
z
Red LED on:
the system is in
Test Mode
.
z
Red LED:
Red flashes, and Backlight on
in the
Away Arm Mode.
z
Red LED flash
with 4 beeps:
failure due to the following reasons:
¾
No response from the control panel.
¾
Request
for
Home mode
during
Arm mode
.
¾
Request
for
Force arm
.
z
Orange LED (Home Arm Key)
z
Orange LED:
Orange flashes and backlight on in the
Home Mode
.
z
Orange LED flashes for 5 seconds:
low battery in Normal Operation Mode, and Tamper open.
z
LED flash
with 4 beeps
:
failure due to the following reasons:
¾
No response from the control panel.
¾
Request
for
Home mode
during
Arm mode
.
¾
Request
for
Force arm
.
