20W Floodlight without PIR
Model: VCS-20
20W Floodlight with PIR
Model: VCS-20-PIR
OPERATION
SPECIFICATION
INFORMATION ON WASTE DISPOSAL FOR CONSUMERS OF ELECTRICAL & ELECTRONIC EQUIPMENT
When this product has reached the end of its life it must be treated as Waste Electrical & Electronic Equipment
(WEEE). Any WEEE marked products must not be mixed with general household waste, but kept separate for the
treatment, recovery and recycling of the materials used.
Contact your local authority for details of recycling schemes in your area.
PRODUCT CODE
VCS-20
VCS-20-PIR
DESCRIPTION
LED Floodlight (20W)
LED Floodlight with PIR (20W)
HOUSING COLOUR
Black
Black
LUMENS
2500 +
2500 +
VOLTAGE
170-240VAC 50Hz
170-240VAC 50Hz
IP RATING
IP65
IP65
ADJUSTABLE OUTPUT
✓
✓
DETECTION CIRCUIT
N/A
Passive Infra-Red (PIR)
PIR ANGLE
N/A
120º
PIR RANGE
N/A
12m
ACTIVATION TIME
N/A
10 Secs - 10 Mins
WEIGHT
1Kg
1Kg
DIMENSIONS
153mm H x 61mm D x 241mm W
161mm H x 61mm D x 241mm W
IMPORTANT OPERATION & MAINTENANCE INSTRUCTIONS
PARTS INCLUDED
TOOLS REQUIRED
DO NOT position the light near flammable or combustible materials (such as wood, cloth, paper) or near
flammable, combustible or explosive liquids, solids, gases or equipment.
DO NOT direct the light into a persons eyes. The light has a very intensive light output, which if incorrectly used
could cause eye damage.
ALWAYS disconnect the mains power supply before servicing or performing any maintenance.
ALWAYS maintain the light in good condition, with repairs only undertaken by a qualified electrician.
ONLY carry out repairs using genuine parts. Non-authorised parts may be dangerous and will invalidate the
warranty.
If the external flexible cable or cord of this luminaire is damaged, it shall be replaced by a special cord or cord
exclusively available from the manufacturer or his service agent.
The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole
luminaire shall be replaced”.
Clean the floodlight only with a soft dry cloth. Do not use any abrasive or chemical cleaners.
1 x Clarius Star with Bracket
2 x Fixing Screws
2 x Wall Plugs
1 x Allen Key
1 x Instructions
Electric / hand-held drill
Masonry drill bit
Electricians screwdriver
Large cross-head screwdriver
Small cross-head screwdriver
Wire cutters
THIS PRODUCT IS SUITABLE FOR WALL MOUNTING ONLY
Controls for the floodlight are located under the removable cover:
Power: Adjusts output power of LEDs
LUX: Adjusts ambient light level of which floodlight operates
PIR Range: Adjusts the range sensitivity of the PIR motion
sensor
Time: Adjusts floodlight on time when PIR is triggered
NOTE: To switch on floodlight continuously follow
the following sequence.
1. Switch power on
2. After 1-2 sec turn off
3. After 1-2 sec turn on
4. Floodlight will remain on until the power is
removed.
TIME
PIR
LUX
POWER
LUX
POWER
VCS-20 - Without PIR
VCS-20-PIR - With PIR
Clarius
®
STAR
Floodlight
Quick Installation Guide
Unit 2, Birch Business Park, Whittle Lane, Heywood, Greater Manchester, OL10 2SX, UK
w: www.gjd.co.uk
t: +44 (0) 1706 363 998
