For general comments please contact us on E-mail at [email protected]
Congratulations! The product you have selected comes from Hella marine - one of the world's leading
manufacturers marine lighting products.
Hella marine branded products are covered by a warranty against manufacturing or material defects. (For further details
please check the terms of trade with your Hella marine agent).
The lamp module is sealed and does not have any serviceable parts inside; opening the module will invalidate warranty.
In the unlikely event that you should experience a problem with your purchase, please contact your Hella marine agent
where you purchased the product.
Warranty Statement
Electromagnetic Compatibility (EMC)
This LED lamp is an electronic device. The electrical circuits contain components that suppress possible interference,
both emission as well as susceptibility.
Protection against damage due to voltage spikes
This lamp is protected against reverse polarity connection and negative voltage spikes of up to 500 volts.
Introduction
Hella marine LED products offer many advantages over conventional bulb lamps.
Significantly reduced power consumption, ultra long life and high tolerance to shock and vibration make the LED lamps the ideal
choice for the harsh marine environment.
Housing Material
UV and impact resistant plastic
Lens Material
Heavy duty polyamide
Bracket Material
Polished 316 stainless steel
Light Source
LED
Installation
Pre-wired with marine cable
Operating Voltage
Multivolt
TM
9-33V DC
Degree of Protection
Over Voltage, Reverse Polarity and Spike Protected
IP 67 - Completely sealed
Power Consumption
<3W (<0.25A@12V / <0.125@24V)
Weight
250g (including cable)
Color Temperature
5500K
Manufacturing Location
New Zealand
www.hellamarine.com
980 703-30 V04
a
b
c
e
d
f
g
Dimensions
a = 136mm / 5.35”
b = 123mm / 4.84”
c = 53.0mm / 2.08’’
d = 49.0mm / 1.93”
e = 46.0mm / 1.81”
f = 32.5mm / 1.28”
g = 90.0mm / 3.54”
h = 25.0mm / 0.98”
h
a
b
c
e
d
f
g
Dimensions
a = 136mm / 5.35”
b = 123mm / 4.84”
c = 53.0mm / 2.08’’
d = 49.0mm / 1.93”
e = 46.0mm / 1.81”
f = 32.5mm / 1.28”
g = 90.0mm / 3.54”
h = 25.0mm / 0.98”
h
a
b
c
e
d
f
g
Dimensions
a = 136mm / 5.35”
b = 123mm / 4.84”
c = 53.0mm / 2.08’’
d = 49.0mm / 1.93”
e = 46.0mm / 1.81”
f = 32.5mm / 1.28”
g = 90.0mm / 3.54”
h = 25.0mm / 0.98”
h
a
b
c
e
d
f
g
Dimensions
a = 136mm / 5.35”
b = 123mm / 4.84”
c = 53.0mm / 2.08’’
d = 49.0mm / 1.93”
e = 46.0mm / 1.81”
f = 32.5mm / 1.28”
g = 90.0mm / 3.54”
h = 25.0mm / 0.98”
h
a
b
c
e
d
f
g
Dimensions
a = 136mm / 5.35”
b = 123mm / 4.84”
c = 53.0mm / 2.08’’
d = 49.0mm / 1.93”
e = 46.0mm / 1.81”
f = 32.5mm / 1.28”
g = 90.0mm / 3.54”
h = 25.0mm / 0.98”
h
a
b
c
e
d
f
g
Dimensions
a = 136mm / 5.35”
b = 123mm / 4.84”
c = 53.0mm / 2.08’’
d = 49.0mm / 1.93”
e = 46.0mm / 1.81”
f = 32.5mm / 1.28”
g = 90.0mm / 3.54”
h = 25.0mm / 0.98”
h
a
b
c
e
d
f
g
Dimensions
a = 136mm / 5.35”
b = 123mm / 4.84”
c = 53.0mm / 2.08’’
d = 49.0mm / 1.93”
e = 46.0mm / 1.81”
f = 32.5mm / 1.28”
g = 90.0mm / 3.54”
h = 25.0mm / 0.98”
h
NB:
Lamp must be protected by a fuse rated at 5 amperes maximum.
Cable colour
Connect to
Power Consumption
Red
Positive (+)
< 3.0 watts
Black
Negative (-)
Wiring Colour Coding
LED modules are polarity conscious. Reverse polarity will not damage this product but will inhibit its function.
Hella recommends wire connections be soldered, and heat shrink tubing applied to seal the joint.
For general comments please contact us on E-mail at [email protected]
Congratulations! The product you have selected comes from Hella marine - one of the world's leading
manufacturers marine lighting products.
Hella marine branded products are covered by a warranty against manufacturing or material defects. (For further details
please check the terms of trade with your Hella marine agent).
The lamp module is sealed and does not have any serviceable parts inside; opening the module will invalidate warranty.
In the unlikely event that you should experience a problem with your purchase, please contact your Hella marine agent
where you purchased the product.
Warranty Statement
Electromagnetic Compatibility (EMC)
This LED lamp is an electronic device. The electrical circuits contain components that suppress possible interference,
both emission as well as susceptibility.
Protection against damage due to voltage spikes
This lamp is protected against reverse polarity connection and negative voltage spikes of up to 500 volts.
Introduction
Hella marine LED products offer many advantages over conventional bulb lamps.
Significantly reduced power consumption, ultra long life and high tolerance to shock and vibration make the LED lamps the ideal
choice for the harsh marine environment.
Housing Material
UV and impact resistant plastic
Lens Material
Heavy duty polyamide
Bracket Material
Polished 316 stainless steel
Light Source
LED
Installation
Pre-wired with marine cable
Operating Voltage
Multivolt
TM
9-33V DC
Degree of Protection
Over Voltage, Reverse Polarity and Spike Protected
IP 67 - Completely sealed
Power Consumption
<3W (<0.25A@12V / <0.125@24V)
Weight
250g (including cable)
Color Temperature
5500K
Manufacturing Location
New Zealand
www.hellamarine.com
980 703-30 V04
a
b
c
e
d
f
g
Dimensions
a = 136mm / 5.35”
b = 123mm / 4.84”
c = 53.0mm / 2.08’’
d = 49.0mm / 1.93”
e = 46.0mm / 1.81”
f = 32.5mm / 1.28”
g = 90.0mm / 3.54”
h = 25.0mm / 0.98”
h
a
b
c
e
d
f
g
Dimensions
a = 136mm / 5.35”
b = 123mm / 4.84”
c = 53.0mm / 2.08’’
d = 49.0mm / 1.93”
e = 46.0mm / 1.81”
f = 32.5mm / 1.28”
g = 90.0mm / 3.54”
h = 25.0mm / 0.98”
h
a
b
c
e
d
f
g
Dimensions
a = 136mm / 5.35”
b = 123mm / 4.84”
c = 53.0mm / 2.08’’
d = 49.0mm / 1.93”
e = 46.0mm / 1.81”
f = 32.5mm / 1.28”
g = 90.0mm / 3.54”
h = 25.0mm / 0.98”
h
a
b
c
e
d
f
g
Dimensions
a = 136mm / 5.35”
b = 123mm / 4.84”
c = 53.0mm / 2.08’’
d = 49.0mm / 1.93”
e = 46.0mm / 1.81”
f = 32.5mm / 1.28”
g = 90.0mm / 3.54”
h = 25.0mm / 0.98”
h
a
b
c
e
d
f
g
Dimensions
a = 136mm / 5.35”
b = 123mm / 4.84”
c = 53.0mm / 2.08’’
d = 49.0mm / 1.93”
e = 46.0mm / 1.81”
f = 32.5mm / 1.28”
g = 90.0mm / 3.54”
h = 25.0mm / 0.98”
h
a
b
c
e
d
f
g
Dimensions
a = 136mm / 5.35”
b = 123mm / 4.84”
c = 53.0mm / 2.08’’
d = 49.0mm / 1.93”
e = 46.0mm / 1.81”
f = 32.5mm / 1.28”
g = 90.0mm / 3.54”
h = 25.0mm / 0.98”
h
a
b
c
e
d
f
g
Dimensions
a = 136mm / 5.35”
b = 123mm / 4.84”
c = 53.0mm / 2.08’’
d = 49.0mm / 1.93”
e = 46.0mm / 1.81”
f = 32.5mm / 1.28”
g = 90.0mm / 3.54”
h = 25.0mm / 0.98”
h
NB:
Lamp must be protected by a fuse rated at 5 amperes maximum.
Cable colour
Connect to
Power Consumption
Red
Positive (+)
< 3.0 watts
Black
Negative (-)
Wiring Colour Coding
LED modules are polarity conscious. Reverse polarity will not damage this product but will inhibit its function.
Hella recommends wire connections be soldered, and heat shrink tubing applied to seal the joint.
LED Sea Hawk - LED Deck Floodlight
INSTRUCTION SHEET
LED Sea Hawk - LED Deck Floodlight
INSTRUCTION SHEET
