PRO GOBO – SETUP INSTRUCTIONS
**
Keep all packaging materials after opening. Gobo must be returned in same box / packaging.**
PLEASE HANDLE WITH CARE – PROJECTORS ARE FRAGILE!
SETUP GOBO
1.
Plug gobo into outlet using power cord provided. It is pre-loaded with your design/color.
2.
Place gobo projector on a table and point it where you want to project the image, such as a wall.
Use the bracket to adjust the angle. See example picture below.
SPECIAL PROGRAMMING WITH REMOTE
If you need to align or rotate your image, locate the remote control provided. Point remote at the back of the
gobo projector. Press the “Speed” button, and then press "Fade/Snap" to rotate the image right or left. When
your image is lined up how you would like, press the “Manual” button to lock it in place
.
…. ...Continued on Reverse Side
SETUP VIDEOS:
www.YouTube.com/RentMyWedding
PHONE:
1-800-465-8020
WEB:
www.RentMyWedding.com
Press "BLACK OUT" to
turn gobo off/on.
Press "Speed" for rotation.
Press "Fade/Snap" to change
direction of rotation.
Press "Manual" to stop
rotation.
