Operating Instructions for
Multi-Range Voltage Detectors
®
The equipment covered by this instruction guide should be selected, installed and
serviced by competent personnel who understand proper safety procedures. This
instruction guide is written for such personnel and is not a substitute for adequate
training and experience in safety procedures regarding this type of equipment.
This guide does not claim to cover all details or variations in equipment nor to
provide for all possible conditions to be met with concerning installation, operation
or maintenance of this equipment. If further information is desired or if particular
problems are encountered which are not sufficiently covered in this guide, contact
Hubbell Power Systems.
Catalog No. .................................................................................Voltage
C4030979 ................................................................................................. 1 - 40 kV w/T.P.
T4032271 ................................................................................................... 1 - 40 kV w/T.P.
T4032633 .................................................................................................. 6 - 120 kV
PSC4031029TP ....................................................................................... 16 - 161 kV w/T.P.
C403-1029 ................................................................................................ 16 - 161 kV
T403-2293 ................................................................................................ 69 - 345 kV
C403-1140 ................................................................................................. 69 - 600 kV
Before operating a Chance Multi-Range Voltage Detector, thoroughly read, understand
and follow these instructions.
Retain these instructions in the device case.
NOTICE
Hubbell has a policy of continuous product improvement.
Please visit hubbellpowersystems.com to confirm current design specifications.
©
2019 Hubbell Incorporated
Printed in USA
210 N. Allen St.
Centralia, MO 65240 USA
Phone: 573-682-5521
Fax: 573-682-8714
http://www.hubbellpowersystems.com
P403-2229 Rev. E
Electrical shock hazard. This device must be installed on an adequately rated,
insulated hot stick.
Do not let universal fitting touch any part of URD cabinet or to become
grounded in any other way. This will damage meter and may cause injury.
▲
!
WARNING
▲
!
CAUTION
