Toilet Fit Guide
You’ll need to measure your toilet to determine:
- Whether a Brondell Swash will fit (the Swash fits most residential toilets)
- Whether you need an Elongated or Round Swash
Do you have an unusual toilet or questions about your measurements?
Please contact Brondell Customer Service at
888-542-3355
, or send us an email at
for additional help.
Is the distance from the center of the bolt holes to
the toilet tank less than 2"?
The Swash may extend slightly over the
front edge of your toilet bowl.
Measure the distance from
the front of the toilet tank to
the front of the toilet bowl.
If this measurement is less than 20½", consider purchasing
a Round size to reduce the amount the seat extends over
the front edge, even if your fixture is elongated.
The overall length of the Round Swash is 19.4".
A distance less than 19.4" from the tank to the front of the
toilet bowl will also cause overhang.
≤ 20½"
Measure
the distance from the bolt holes
to the front of the toilet bowl
to determine
if you have a
round
or
elongated
fixture.
Measure
the distance between the bolt
holes
to ensure the space is
between
5¼ inches and 8 inches.
Measure
the distance from the center of the
bolt holes to the toilet tank
to determine
proper clearance. The toilet will need
at least
1½ inches
of clearance.
5¼" – 8"
18" – 19½"
ELONGATED
If your measurement is 18" – 19½"
Order an
Elongated Swash
If your measurement is 16" – 17¾"
Order a
Round Swash
16" – 17¾"
ROUND
≥ 1½"
≥ 1½"
from center
French
Curved
Tank
