B&B Electronics 232SPS2 User Manual Download

Page: 1 / 14

232SPS2-3903 Manual

Cover Page

B&B Electronics -- PO Box 1040 -- Ottawa, IL 61350

PH (815) 433-5100 -- FAX (815) 433-5104

Parallel to Serial and

Serial to Parallel Converter

Model 232SPS2

Documentation Number 232SPS2-3903

This product designed and manufactured in Ottawa, Illinois

USA

of domestic and imported parts by

International Headquarters

B&B Electronics Mfg. Co. Inc.

707 Dayton Road -- P.O. Box 1040 -- Ottawa, IL 61350 USA

Phone (815) 433-5100 -- General Fax (815) 433-5105

Home Page: www.bb-elec.com

Sales e-mail:

[email protected]

-- Fax (815) 433-5109

Technical Support e-mail:

[email protected]

-- Fax (815) 433-5104

European Headquarters

B&B Electronics Ltd.

Westlink Commercial Park, Oranmore, Co. Galway, Ireland

Phone +353 91-792444 -- Fax +353 91-792445

Home Page: www.bb-europe.com

Sales e-mail:

[email protected]

Technical Support e-mail:

[email protected]



B&B Electronics -- Revised October 2003

Summary of Contents for 232SPS2















Search results

Summary of Contents for 232SPS2

Reviews:

Related manuals for 232SPS2

Brands by name

Popular brands

B&B Electronics 232SPS2, User Manual

Search results

Summary of Contents for 232SPS2

Reviews:

Related manuals for 232SPS2

Brands by name

Popular brands