SELECTABLE FEATURES
Note : When both Passive Arming and Voltage Sensing are selected, you must hardwire the driver’s door pin switch in order to
begin the passive arming sequence.
RF Programmable Features :
Feature Selection
1 Chirp
2 Chirps
Default
First
1 Second Door Locks
3.5 Second Door Locks
1 Second
Second
Auto Lock On
Auto Lock Off
Auto Lock Off
Third
Auto Unlock On
Auto Unlock Off
Auto Unlock Off
Fourth
Passive Door Locks
Active Door Locks
Active Locks
Fifth
Passive Arm
Active Arm
Passive Arm
Sixth
Voltage Sense On
Hardwire
Hardwire On
Seventh
Horn Chirps on
Horn chirps Off
Horn Chirps On
Eighth
Siren Chirps On
Siren Chirps Off
Siren Chirps On
To program these selectable features;
Action
System Response
LED Response
Turn ignition on
No response
Flip valet switch on then off 3 times
1 Chirp - LED 1 flash
Within 3 seconds, turn ignition Off
Short chirp, then long chirp
First
Within 3 seconds, turn ignition On
1 chirp = 1 second door locks
1 Flash Pause...
Press transmitter L/UL button to change
2 chirps = 3.5 second door locks
or
Second
Flip valet switch on then off
2 chirps = auto locks off
2 Flash Pause...
Press transmitter L/UL button to change
1 chirp = auto locks on
or
Third
Flip valet switch on then off
2 chirps = auto unlock off
3 Flash Pause...
Press transmitter L/UL button to change
1 chirp = auto unlock on
or
Fourth
Flip valet switch on then off
1 chirp = passive locks
4 Flash Pause...
Press transmitter L/UL button to change
2 chirps = active locks
or
Fifth
Flip valet switch on then off
1 chirp = Passive Arm
5 Flash Pause...
Press transmitter L/UL button to change
2 chirps = Active Arm
or
Sixth
Flip valet switch on then off
1 chirp = Voltage sense on
Six Flash Pause...
Press transmitter L/UL button to change
2 chirps = Hardwire
or
Seventh
Flip valet switch on then off
1 chirp = Horn chirps on
Seven Flash Pause...
Press transmitter L/UL button to change
2 chirps = Horn chirps off
or
Eighth
Flip Valet Switch on then off
1 chirp = Siren chirps on
Eight Flash Pause...
Press transmitter L/UL button to change
2 chirps = Siren chirps off
or
Flip valet switch on then off
Exit program mode
or
Turn ignition key off
Exit program mode
Note : Once you enter the feature programming mode, do not allow more than 15 seconds to pass between steps, or the
programming will be terminated.
Page 1
128-5415A
1 of 6
Model PRO-9344FT
Installation Manual
Released. 11-10-98
Change To PRO-OE2, FT Transmitter
Rev. A 3-17-99 Change to transmitter PD22
